Beckmann Alexander Felix, Rana Anirudh Singh, Torrilhon Manuel, Struchtrup Henning
Department of Mechanical Engineering, University of Victoria, Victoria, BC V8W 3P6, Canada.
Mathematics Institute, University of Warwick, Warwick CV4 7AL, UK.
Entropy (Basel). 2018 Sep 6;20(9):680. doi: 10.3390/e20090680.
Due to the failure of the continuum hypothesis for higher Knudsen numbers, rarefied gases and microflows of gases are particularly difficult to model. Macroscopic transport equations compete with particle methods, such as the Direct Simulation Monte Carlo method (DSMC), to find accurate solutions in the rarefied gas regime. Due to growing interest in micro flow applications, such as micro fuel cells, it is important to model and understand evaporation in this flow regime. Here, evaporation boundary conditions for the R13 equations, which are macroscopic transport equations with applicability in the rarefied gas regime, are derived. The new equations utilize Onsager relations, linear relations between thermodynamic fluxes and forces, with constant coefficients, that need to be determined. For this, the boundary conditions are fitted to DSMC data and compared to other R13 boundary conditions from kinetic theory and Navier-Stokes-Fourier (NSF) solutions for two one-dimensional steady-state problems. Overall, the suggested fittings of the new phenomenological boundary conditions show better agreement with DSMC than the alternative kinetic theory evaporation boundary conditions for R13. Furthermore, the new evaporation boundary conditions for R13 are implemented in a code for the numerical solution of complex, two-dimensional geometries and compared to NSF solutions. Different flow patterns between R13 and NSF for higher Knudsen numbers are observed.
由于更高克努森数下连续介质假设的失效,稀薄气体和气体微流动的建模尤为困难。宏观输运方程与粒子方法(如直接模拟蒙特卡罗方法(DSMC))相互竞争,以在稀薄气体区域找到精确解。由于对微流动应用(如微型燃料电池)的兴趣日益增加,在这种流动区域对蒸发进行建模和理解非常重要。在此,推导了适用于稀薄气体区域的宏观输运方程R13方程的蒸发边界条件。新方程利用昂萨格关系,即热力学通量与力之间的线性关系,其系数为常数,需要确定。为此,将边界条件与DSMC数据进行拟合,并与针对两个一维稳态问题的动力学理论和纳维-斯托克斯-傅里叶(NSF)解得到的其他R13边界条件进行比较。总体而言,新的唯象学边界条件的拟合结果与DSMC的一致性比R13的替代动力学理论蒸发边界条件更好。此外,R13的新蒸发边界条件被应用于一个用于求解复杂二维几何形状的代码中,并与NSF解进行比较。观察到更高克努森数下R13和NSF之间的不同流动模式。