Institut Montpelliérain de la main et du membre supérieur (I.M.M.), 560, avenue du Colonel Pavelet, 34070 Montpellier, France.
Hand Surg Rehabil. 2021 Sep;40S:S15-S20. doi: 10.1016/j.hansur.2020.04.013. Epub 2020 Dec 26.
The numerous surgical techniques proposed for treating thumb basal joint arthritis (osteotomy of the first metacarpal, trapezial osteotomy, simple trapeziectomy, trapeziectomy with implant, total joint prosthesis, arthroplasty by interposition, etc.) necessitate an anatomically based radiological evaluation of the different pathological forms of thumb basal joint arthritis. Here, the author defines three parameters: narrowing of the trapeziometacarpal (TM) joint space: TMA; TM instability and subluxation: TM I; scaphotrapeziotrapezoid damage: STT. Four stages of TM osteoarthritic deterioration are defined: TMA0: no joint narrowing (painful and unstable joint); TMA1: narrowing <50%; TMA2: narrowing>50%; TMA3: disappearance of the joint space, bone erosions. For TM instability/subluxation: TMI 0: reducible subluxation (unstable and painful TM); TMI 1: reducible subluxation but with imperfect reintegration; TMI 2: non-reducible subluxation <1/3; TMI 3: subluxation>1/3. For STT damage, STT 0: radiograph is normal but anatomical damage is visible intraoperatively; STT 1: joint space narrowing <50%; STT 2: joint space is barely visible; STT 3: presence of erosion, sclerosis, irregularities. He outlines the shortcomings of the often-used Dell and Eaton-Littler classifications. A prospective study involving multiple cases having the same anatomical and radiological appearance that are assessed with sufficient follow-up is needed to standardize the modalities of surgical treatment.
为了治疗拇指基底关节关节炎,人们提出了许多手术技术(第一掌骨截骨术、大多角骨截骨术、单纯大多角骨切除术、植入物辅助大多角骨切除术、全关节假体、关节间成形术等),这需要对拇指基底关节关节炎的不同病理形式进行基于解剖学的放射学评估。在这里,作者定义了三个参数:大多角骨关节间隙变窄:TMA;TM 不稳定和半脱位:TM I;舟状骨大多角骨关节损伤:STT。定义了 TM 骨关节炎恶化的四个阶段:TMA0:无关节狭窄(疼痛和不稳定的关节);TMA1:狭窄<50%;TMA2:狭窄>50%;TMA3:关节间隙消失,骨侵蚀。对于 TM 不稳定/半脱位:TMI0:可复位半脱位(不稳定和疼痛的 TM);TMI1:可复位半脱位,但不完全整合;TMI2:不可复位半脱位<1/3;TMI3:半脱位>1/3。对于 STT 损伤,STT0:影像学正常,但术中可见解剖损伤;STT1:关节间隙狭窄<50%;STT2:关节间隙几乎不可见;STT3:存在侵蚀、硬化、不规则。他概述了常用的 Dell 和 Eaton-Littler 分类的缺点。需要对具有相同解剖学和影像学表现的多个病例进行前瞻性研究,并进行足够的随访,以标准化手术治疗方式。