Analysis of the Impact of Changes in Thermomechanical Properties of Polymer Materials on the Machining Process of Gears.

This paper presents an analysis of the impact of modification of thermomechanical properties of polymer materials on the process of gear wheel machining on a CNC machine tool. Polymer materials Tecaflon (PVDA) and polyethylene (PE) were used for processing. The materials underwent thermal modification i.e., annealing. Prepared samples (gear wheel dimensions Ø76.5 × 20 mm) were machined under the same conditions, only changing the feed rate parameter. A CNC milling machine of its own construction was used for machining with a horizontal numerical dividing attachment. The obtained gear wheels were tested using ZEISS GEAR PRO gear analyzes software. Deviations of the involute outline and the tooth line allowed classification of wheels in the 9th grade of accuracy. Machined teeth surfaces were examined for changes in the properties of surface layer, taking into account the influence of polymer material thermal modification on the surface condition. The samples were tested for mechanical properties (tensile strength) and thermomechanical properties (DSC and DMTA). The tests showed positive changes in material strength and significant improvements in PVDA Tecaflon after heat treatment.