Suppr超能文献

大麦外壳的结构影响其对机械应力的抗性。

The Structure of the Barley Husk Influences Its Resistance to Mechanical Stress.

作者信息

Grant Kathryn R, Brennan Maree, Hoad Stephen P

机构信息

School of Biological Sciences, College of Science and Engineering, Institute of Plant Sciences, University of Edinburgh, Edinburgh, United Kingdom.

Department of Agriculture, Horticulture and Engineering Sciences, Scotland's Rural College, Edinburgh, United Kingdom.

出版信息

Front Plant Sci. 2021 Jan 26;11:614334. doi: 10.3389/fpls.2020.614334. eCollection 2020.

Abstract

This paper explores the links between genotype, plant development, plant structure and plant material properties. The barley husk has two organs, the lemma and the palea, which protect the grain. When the husk is exposed to mechanical stress, such as during harvesting, it can be damaged or detached. This is known as , which is detrimental to grain quality and has a significant economic impact on industry. This study focused on the lemma, the husk organ which is most susceptible to grain skinning. This study tested three hypotheses: (1) genotype and plant development determine lemma structure, (2) lemma structure influences the material properties of the lemma, and (3) the material properties of the lemma determine grain skinning risk. The effect of genotype was investigated by using plant material from four malting barley varieties: two with a high risk of grain skinning, two with a low risk. Plant material was assessed at two stages of plant development (anthesis, GS 65; grain filling, GS 77). Structure was assessed using light microscopy to measure three physiological features: thickness, vasculature and cell area. Material properties were approximated using a controlled impact assay and by analyzing fragmentation behavior. Genotype had a significant effect on lemma structure and material properties from anthesis. This indicates that differences between genotypes were established during floral development. The lemma was significantly thinner in high risk genotypes, compared to low risk genotypes. Consequently, in high risk genotypes, the lemma was significantly more likely to fragment. This indicates a relationship between reduced lemma thickness and increased fragmentation. Traditionally, a thin husk has been considered beneficial for malting quality, due to an association with malt extract. However, this study finds a thin lemma is less resistant to mechanical stress. This may explain the differences in grain skinning risk in the genotypes studied.

摘要

本文探讨了基因型、植物发育、植物结构与植物材料特性之间的联系。大麦颖壳有两个器官,即外稃和内稃,用于保护籽粒。当颖壳受到机械应力时,比如在收获期间,它可能会受损或脱落。这被称为籽粒脱壳,对籽粒品质有害,并且对产业有重大经济影响。本研究聚焦于外稃,它是颖壳器官中最易发生籽粒脱壳的部分。本研究检验了三个假设:(1)基因型和植物发育决定外稃结构;(2)外稃结构影响外稃的材料特性;(3)外稃的材料特性决定籽粒脱壳风险。通过使用来自四个麦芽大麦品种的植物材料来研究基因型的影响:两个具有高籽粒脱壳风险,两个具有低籽粒脱壳风险。在植物发育的两个阶段(开花期,GS 65;灌浆期,GS 77)对植物材料进行评估。使用光学显微镜测量三个生理特征来评估结构:厚度、维管系统和细胞面积。通过控制冲击试验和分析破碎行为来近似评估材料特性。从开花期起,基因型对外稃结构和材料特性有显著影响。这表明基因型之间的差异在花发育期间就已确立。与低风险基因型相比,高风险基因型的外稃明显更薄。因此,在高风险基因型中,外稃明显更易破碎。这表明外稃厚度减小与破碎增加之间存在关联。传统上,由于与麦芽浸出物有关联,薄颖壳被认为对麦芽品质有益。然而,本研究发现薄外稃对机械应力的抵抗力较弱。这可能解释了所研究基因型中籽粒脱壳风险的差异。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7201/7871009/8bc2d7c432fa/fpls-11-614334-g0001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验