University of Georgia, Department of Food Science and Technology, Athens, Georgia, USA.
J Food Sci. 2021 Apr;86(4):1335-1342. doi: 10.1111/1750-3841.15665. Epub 2021 Mar 7.
In the orange juice industry, pulp (ruptured juice sacs) is separated from the juice after extraction and pasteurized separately before blending back with juice or sold for other food applications. However, pulp is not always pasteurized immediately after extraction and the flow behavior is affected by endogenous pectinmethylesterase (PME). This is particularly important because of the high power required to pump orange pulp in industrial pasteurizers. This study characterized the effect of PME on the flow behavior of citrus pulp during storage at 4 °C using rotational rheometry and during pulp storage at 22 °C using capillary rheometry. PME activity was 0.011 ± 0.001 PEU for the pulp used in rotational rheometry and 0.030 ± 0.002 PEU for the pulp used in capillary rheometry. Rotational rheometry was used to assess the effect of PME on the Power Law parameters at shear rates ( ) below those that cause slip. There were no significant differences among storage time on the flow behavior index (n). However, the consistency coefficient (K) increased with storage time. Significant differences were found after 12-hr storage increasing from 120 ± 30 Pa·s to 160 ± 15 Pa·s (16.7%) after 24 hr. Capillary rheomtery was used to assess the effect of PME on the pressure drop in a flow system. Significant differences were found at or after 12-hr storage. The mean pressure drop increased by 34% after 24 hr, for a flow rate of 50 × 10 m /s (0.8 GPM) in an 8.9-m long (29.2 ft), 0.022-m (1-in) diameter pipe. PRACTICAL APPLICATION: Design and optimization of processing equipment and industrial handling systems of orange pulp require detailed knowledge of its rheological (flow) properties. Citrus pulp is rich in pectinmethylesterase, an enzyme that causes thickening of the product when not inactivated during pasteurization. Understanding how fast PME affects the flow properties of orange pulp is important for citrus processors to decide how long pulp can be stored before pasteurizing it.
在橙汁行业中,在提取后将果肉(破裂的果汁囊)与果汁分离,并在与果汁混合或销售用于其他食品应用之前分别进行巴氏杀菌。然而,果肉并非总是在提取后立即进行巴氏杀菌,其流动行为会受到内源性果胶甲酯酶(PME)的影响。这一点非常重要,因为在工业巴氏杀菌器中泵送橙汁果肉需要很高的功率。本研究使用旋转流变仪在 4°C 下储存时以及使用毛细管流变仪在 22°C 下储存时,对 PME 对柑橘果肉的流动行为的影响进行了表征。用于旋转流变仪的果肉的 PME 活性为 0.011±0.001 PEU,用于毛细管流变仪的果肉的 PME 活性为 0.030±0.002 PEU。旋转流变仪用于评估 PME 在低于引起滑移的剪切速率( )下对幂律参数的影响。在储存时间上,流动行为指数(n)没有明显差异。然而,稠度系数(K)随储存时间的增加而增加。在 12 小时储存后发现了显著差异,从 120±30 Pa·s 增加到 24 小时后的 160±15 Pa·s(增加了 16.7%)。毛细管流变仪用于评估 PME 对流动系统压降的影响。在 12 小时储存时或之后发现了显著差异。对于 50×10 m/s(0.8 GPM)的流速,在 8.9 米长(29.2 英尺)、0.022 米(1 英寸)直径的管道中,在 24 小时后,平均压降增加了 34%。
实际应用:橙汁果肉加工设备和工业处理系统的设计和优化需要详细了解其流变(流动)特性。柑橘果肉富含果胶甲酯酶,这种酶在巴氏杀菌过程中未失活时会使产品变稠。了解 PME 对橙汁果肉流动特性的影响速度对柑橘加工商很重要,这可以决定在对果肉进行巴氏杀菌之前可以储存多长时间。