Wang Xin-Yuan, Yang Qi-Peng, Tian Shi-Jie, Song Fan-Hao, Guo Fei, Huang Nan-Nan, Tan Wei-Qiang, Bai Ying-Chen
School of Environmental and Municipal Engineering, Qingdao University of Technology, Qingdao, China.
State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, China.
Front Chem. 2021 May 28;9:679286. doi: 10.3389/fchem.2021.679286. eCollection 2021.
The photochemical reactivity of humic substances plays a critical role in the global carbon cycle, and influences the toxicity, mobility, and bioavailability of contaminants by altering their molecular structure and the mineralization of organic carbon to CO. Here, we examined the simulated irradiation process of Chinese standard fulvic acid (FA) and humic acid (HA) by using excitation-emission matrix fluorescence combined with fluorescence regional integration (FRI), parallel factor (PARAFAC) analysis, and kinetic models. Humic-like and fulvic-like materials were the main materials (constituting more than 90%) of both FA and HA, according to the FRI analysis. Four components were identified by the PARAFAC analysis: fulvic-like components composed of both carboxylic-like and phenolic-like chromophores (C1), terrestrial humic-like components primarily composed of carboxylic-like chromophores (C2), microbial humic-like overwhelming composed of phenolic-like fluorophores (C3), and protein-like components (C4). After irradiation for 72 h, the maximum fluorescence intensity ( ) of C1 and C2 of FA was reduced to 36.01-58.34%, while the of C3 of both FA and HA also decreased to 0-9.63%. By contrast, for HA, the of its C1 and C2 increased to 236.18-294.77% when irradiated for 72 h due to greater aromaticity and photorefractive tendencies. The first-order kinetic model ( = 0.908-0.990) fitted better than zero-order kinetic model ( = 0-0.754) for the C1, C2, and C3, of both FA and HA, during their photochemical reactivity. The photodegradation rate constant ( ) of C1 had values (0.105 for FA; 0.154 for HA) that surpassed those of C2 (0.059 for FA, 0.079 for HA) and C3 (0.079 for both FA and HA) based on the first-order kinetic model. The half-life times of C1, C2, and C3 ranged from 6.61-11.77 h to 4.50-8.81 h for FA and HA, respectively. Combining an excitation-emission matrix with FRI and PARAFAC analyses is a powerful approach for elucidating changes to humic substances during their irradiation, which is helpful for predicting the environmental toxicity of contaminants in natural ecosystems.
腐殖质的光化学反应性在全球碳循环中起着关键作用,并通过改变污染物的分子结构以及有机碳矿化生成二氧化碳来影响污染物的毒性、迁移性和生物可利用性。在此,我们利用激发-发射矩阵荧光结合荧光区域积分(FRI)、平行因子(PARAFAC)分析和动力学模型,研究了中国标准富里酸(FA)和腐殖酸(HA)的模拟辐照过程。根据FRI分析,类腐殖质和类富里酸物质是FA和HA的主要成分(占比超过90%)。通过PARAFAC分析鉴定出四个组分:由类羧基和类酚基发色团组成的类富里酸组分(C1)、主要由类羧基发色团组成的陆地类腐殖质组分(C2)、主要由类酚基荧光团组成的微生物类腐殖质组分(C3)以及类蛋白质组分(C4)。辐照72小时后,FA的C1和C2的最大荧光强度( )降至36.01 - 58.34%,而FA和HA的C3的 也降至0 - 9.63%。相比之下,对于HA,由于其更高的芳香性和光折射倾向,辐照72小时后其C1和C2的 增加到236.18 - 294.77%。在FA和HA的光化学反应过程中,一级动力学模型( = 0.908 - 0.990)对C1、C2和C3的拟合效果优于零级动力学模型( = 0 - 0.754)。基于一级动力学模型,C1的光降解速率常数( )值(FA为0.105;HA为0.154)超过C2(FA为0.059,HA为0.079)和C3(FA和HA均为0.079)。FA的C1、C2和C3的半衰期分别为6.61 - 11.77小时,HA的半衰期分别为4.50 - 8.81小时。将激发-发射矩阵与FRI和PARAFAC分析相结合是阐明腐殖质在辐照过程中变化的有力方法,这有助于预测自然生态系统中污染物的环境毒性。