Dhanaraj Dinesh, Parisien Robert L, McHale Kevin J, Cable Brian, Cusano Antonio, Sennett Brian J, Kelly John D
Penn Medicine Princeton Medical Center, Plainsboro, New Jersey, U.S.A.
University of Pennsylvania, Philadelphia, Pennsylvania, U.S.A.
Arthrosc Sports Med Rehabil. 2021 Mar 21;3(3):e645-e649. doi: 10.1016/j.asmr.2020.12.011. eCollection 2021 Jun.
The purpose of this morphologic cadaveric study was to quantitatively define the composition of the previously described comma tissue along with its relation to the subscapularis tendon insertion.
Fresh frozen cadaveric shoulder specimens were included for analysis. The coracohumeral ligament (CHL) was exposed at its origin along the base of the coracoid process and freed laterally along its course to the lesser tuberosity adjacent to the bicipital groove. The superior glenohumeral ligament (SGHL) was identified and traced along its course deep to the CHL within the rotator interval with insertion onto the superior aspect of the lesser tuberosity. The midpoint diameters of the SGHL and CHL and their composite insertional diameters on the subscapularis tendon insertion and lesser tuberosity were measured with digital calipers. The mean diameter was determined from 3 measurements taken of each ligament.
Eight specimens were included. With the use of digital calipers, the mean midpoint diameters of the SGHL and CHL were identified as 5.99 mm (range, 5.25-6.91 mm) and 5.13 mm (range, 4.28-5.72 mm), respectively. The composite insertional diameter of the SGHL and CHL on both the lesser tuberosity and humeral insertion of the subscapularis tendon was 9.93 mm (range, 6.69-12.05 mm). At its insertion, the SGHL and CHL comprised 54% and 46% of the comma tissue, respectively. Additionally, all specimens were identified as showing a confluence of the SGHL and CHL composite insertion with the subscapularis tendon at the point of its humeral head insertion.
The comma tissue is a pivotal structure for the identification, mobilization, and repair of retracted subscapularis tendon tears. Therefore, quantitative knowledge of the midpoint diameter, insertional diameter, and composite distribution of the CHL and SGHL provided by this morphologic cadaveric analysis may aid surgeons in their efforts to restore the native anatomy.
Subscapularis tendon tears have often been under-addressed during rotator cuff repair. The comma tissue has been described as an anatomic structure that can aid in the identification, mobilization, and repair of retracted subscapularis tendon tears. Therefore, quantitative knowledge of this important arthroscopic landmark may aid surgeons in their efforts to restore the native anatomy.
本形态学尸体研究的目的是定量确定先前描述的逗号状组织的组成及其与肩胛下肌腱止点的关系。
纳入新鲜冷冻的尸体肩部标本进行分析。喙肱韧带(CHL)在其起源处沿喙突基部暴露,并沿其走行向外侧游离至毗邻肱二头肌沟的小结节。识别并追踪肩肱上韧带(SGHL),其在旋转间隙内沿CHL深层走行,止于小结节的上表面。用数字卡尺测量SGHL和CHL的中点直径及其在肩胛下肌腱止点和小结节上的复合插入直径。每个韧带的平均直径由3次测量确定。
纳入8个标本。使用数字卡尺,SGHL和CHL的平均中点直径分别确定为5.99 mm(范围5.25 - 6.91 mm)和5.13 mm(范围4.28 - 5.72 mm)。SGHL和CHL在小结节和肩胛下肌腱肱骨止点处的复合插入直径为9.93 mm(范围6.69 - 12.05 mm)。在其止点处,SGHL和CHL分别占逗号状组织的54%和46%。此外,所有标本均显示SGHL和CHL复合插入在肩胛下肌腱肱骨头止点处与肩胛下肌腱汇合。
逗号状组织是识别、松解和修复回缩性肩胛下肌腱撕裂的关键结构。因此,本形态学尸体分析提供的关于CHL和SGHL中点直径、插入直径及复合分布的定量知识可能有助于外科医生恢复正常解剖结构。
肩胛下肌腱撕裂在肩袖修复中常常未得到充分处理。逗号状组织被描述为一种有助于识别、松解和修复回缩性肩胛下肌腱撕裂的解剖结构。因此,关于这个重要关节镜标志的定量知识可能有助于外科医生恢复正常解剖结构。