El-Sayed Taha Awadallah
Structural Engineering Department, Faculty of Engineering at Shoubra, Benha University, Cairo 11629, Egypt.
Polymers (Basel). 2021 Nov 1;13(21):3789. doi: 10.3390/polym13213789.
Geopolymer concrete (GC) is a substantial sort that is created by utilizing metakaolin, ground granulated blast furnace slag (GGBS), silica fumes, fly ash, and other cementitious materials as binding ingredients. The current study concentrated on the structural behavior of the ferrocement geopolymer HSC-columns subjected to axial loading and produced using rice straw ash (RSA). The major goal of this research was to use the unique features of the ferrocement idea to manufacture members that function as columns bearing members. As they are more cost-effective and lower in weight, these designed elements can replace traditional RC members. The study also intended to reduce the cost of producing new parts by utilizing low-cost materials such as light weight expanded and welded wire meshes, polyethylene mesh (Tensar), and fiber glass mesh. For this purpose, an experimental plan was conducted and a finite element prototype with ANSYS2019-R1 was implemented. Nine geopolymer ferrocement columns of dimensions of 150 mm × 150 mm × 1600 mm with different volume-fraction and layers as well as a number of metallic and nonmetallic meshes were examined under axial compression loading until failure. The performance of the geopolymer columns was examined with consideration to the mid-span deflection, ultimate failure load, first crack load with various phases of loading, the cracking patterns, energy absorption and ductility index. Expanded or welded ferrocement geopolymer columns showed greater ultimate failure loads than the control column. Additionally, using expanded or welded columns had a considerable effect on ultimate failure loads, where the welded wire mesh exhibited almost 28.10% compared with the expanded wire mesh. Columns reinforced with one-layer of nonmetallic Tensar-mesh obtained a higher ultimate failure load than all tested columns without concrete cover spalling. The analytical and experimental results were in good agreement. The results displayed an accepted performance of the ferrocement geopolymer HSC-columns.
地质聚合物混凝土(GC)是一种重要的混凝土类型,它通过使用偏高岭土、磨细粒化高炉矿渣(GGBS)、硅灰、粉煤灰和其他胶凝材料作为粘结成分来制备。当前的研究集中在以稻壳灰(RSA)制备的、承受轴向荷载的铁纤维增强地质聚合物高性能混凝土柱的结构性能上。本研究的主要目标是利用铁纤维增强理念的独特特性来制造用作柱承重构件的构件。由于这些设计的构件更具成本效益且重量更轻,它们可以替代传统的钢筋混凝土构件。该研究还旨在通过使用低成本材料,如轻质膨胀钢丝网、焊接钢丝网、聚乙烯网(Tensar)和玻璃纤维网,来降低生产新构件的成本。为此,进行了一个试验方案,并使用ANSYS2019 - R1实现了一个有限元原型。对九个尺寸为150毫米×150毫米×1600毫米、具有不同体积分数、层数以及多种金属和非金属网的地质聚合物铁纤维增强柱在轴向压缩荷载下进行试验直至破坏。考虑中跨挠度、极限破坏荷载、不同加载阶段的初裂荷载、裂缝模式、能量吸收和延性指数,对地质聚合物柱的性能进行了研究。膨胀或焊接的铁纤维增强地质聚合物柱显示出比对照柱更高的极限破坏荷载。此外,使用膨胀或焊接柱对极限破坏荷载有相当大的影响,其中焊接钢丝网与膨胀钢丝网相比,极限破坏荷载提高了近28.10%。用一层非金属Tensar网增强的柱比所有未出现混凝土保护层剥落的试验柱获得了更高的极限破坏荷载。分析结果与试验结果吻合良好。结果表明铁纤维增强地质聚合物高性能混凝土柱具有可接受的性能。