10 GHz regeneratively mode-locked thulium fiber laser with a stabilized repetition rate.

GHz pulsed thulium-doped fiber laser with stabilized repetition rate can enable a wide range of applications. By employing regenerative mode-locking and cavity stabilization technique, we have for the first time demonstrated a 10 GHz polarization-maintaining thulium-doped fiber laser, which has a long-term repetition-rate stabilization and picosecond timing-jitter. In our experiment, a RF circuitry is designed to extract the 10 GHz longitudinal clock signal so that stable regenerative mode-locking is achieved. A piezo actuator-based phase-lock-loop is used to lock the regeneratively mode-locked pulses to a local reference synthesizer. The regeneratively mode-locked pulses with picosecond pulse width exhibit a high super-mode suppression ratio of 60 dB. In addition, the repetition rate of the laser shows good long-term stability with a variation of 8 Hz in 8 hours, corresponding to a cavity free spectral range fluctuation of less than 16 mHz. Meanwhile, the Allan deviation of the stabilized 10 GHz regeneratively mode-locked pulses is measured to be as low as 2 × 10 over 1000 s average time, which is only limited by the stability of the reference synthesizer. Such an ultra-stable 10 GHz pulsed thulium fiber laser may find potential application in 2 µm optical communication, material processing and spectroscopy.