Influence of salinity on heavy metal and oil removal from hypersaline oilfield-produced water by electrocoagulation: mechanistic insights.

The focus of the present study was to explore how and to what extent ultrahigh salinity affects the adsorption of cadmium and hydrocarbon pollutants onto aluminum hydroxide adsorbents formed in an electrocoagulation process. The changes in the nature and structure of the electro-generated aluminum particles and the possible removal mechanisms due to high salt content were investigated by using FE-SEM/EDS, FTIR, BET, and XRD analyses. The pseudo-second order and Freundlich models proved to fit the data for cadmium adsorption onto the aluminum hydroxides best. It was demonstrated that the adsorption capacities were significantly affected by the high salinity. With the rise of the salinity from 2 to 170 g/L, the cadmium and COD removal yields dropped from 81 to 60% and from 90 to 72%. The increase of the oil content led to the enhanced cadmium adsorption capacity due to surface complexation and ion exchange mechanisms. It was proved that Lagergren pseudo-first-order kinetic model could justify COD abatement trends. FTIR spectra depicted that the negative impact of high salinities on the adsorption was due to causing the formation of less stable adsorbents. According to BET analysis, the occurrence of much wider pore size distribution and smaller specific surface area in high salinity case was the main reason for the decreased adsorption capacity. Based on XRD analysis, the higher crystallinity of the produced aluminum hydroxide particles and their consequential smaller surface areas resulted in the lower adsorption capacity in the hypersaline environment. It was concluded that adsorption via inner-sphere and outer-sphere complexation and sweep flocculation were the possible removal mechanisms. Total treatment cost of 8.75 and 3.49 €/m were estimated for low and ultrahigh salinity conditions.