Murti Wisnu, Yun Ji-Hoon
Department of Electrical and Information Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea.
Sensors (Basel). 2021 Nov 29;21(23):7974. doi: 10.3390/s21237974.
Multi-link operation is a new feature of IEEE 802.11be Extremely High Throughput (EHT) that enables the utilization of multiple links using individual frequency channels to transmit and receive between EHT devices. This paper aims to illustrate enhanced multi-link channel access schemes, identify the associated coexistence challenge, and propose solutions. First, we describe the multi-link operation of IEEE 802.11be and how the asynchronous and synchronous channel access schemes facilitate multi-link utilization. Next, we describe the design variants of the synchronous channel access scheme and demonstrate the associated coexistence challenge. Subsequently, we propose four features to address this challenge by assigning penalties to multi-link devices (repicking a backoff count, doubling the contention window size, switching to another contention window set, and compensating the backoff count) as well as five coexistence solutions derived from combinations of these features. Comparative simulation results are provided and analyzed for dense single-spot and indoor random deployment scenarios, demonstrating that the throughput and latency gains of multi-link operation differ between schemes. At the same time, we investigate the coexistence performance of multi-link operation with and without the capability of simultaneous transmission and reception and demonstrate that the proposed solutions mitigate the coexistence problem. In particular, compensating the backoff count achieves the highest coexistence performance among the proposed solutions, with a marginal throughput decrease of multi-link devices. A metric for evaluating both the throughput and latency gains and the coexistence performance of a multi-link channel access scheme using a single value is also proposed.
多链路操作是IEEE 802.11be极高吞吐量(EHT)的一项新特性,它能够利用多个单独的频率信道在EHT设备之间进行发送和接收。本文旨在阐述增强型多链路信道接入方案,识别相关的共存挑战,并提出解决方案。首先,我们描述IEEE 802.11be的多链路操作以及异步和同步信道接入方案如何促进多链路利用。接下来,我们描述同步信道接入方案的设计变体,并展示相关的共存挑战。随后,我们提出四个特性来应对这一挑战,即对多链路设备施加惩罚(重新选择退避计数、将竞争窗口大小加倍、切换到另一个竞争窗口集以及补偿退避计数),以及从这些特性组合中得出的五种共存解决方案。针对密集单点和室内随机部署场景提供并分析了对比仿真结果,表明不同方案之间多链路操作的吞吐量和延迟增益有所不同。同时,我们研究了具有和不具有同时收发能力的多链路操作的共存性能,并证明所提出的解决方案减轻了共存问题。特别是,在所提出的解决方案中,补偿退避计数实现了最高的共存性能,多链路设备的吞吐量略有下降。还提出了一种使用单一值来评估多链路信道接入方案的吞吐量和延迟增益以及共存性能的指标。