Fang Hui, Lippmann Stephanie, Zhang Qingyu, Zhu Mingfang, Rettenmayr Markus
Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, People's Republic of China.
Otto Schott Institute of Materials Research, Friedrich-Schiller-Universität, Löbdergraben 32, Jena 07743, Germany.
Philos Trans A Math Phys Eng Sci. 2022 Feb 21;380(2217):20200328. doi: 10.1098/rsta.2020.0328. Epub 2022 Jan 3.
Microstructural evolution in the presence of liquid film migration (LFM) is simulated for Al-Cu alloys using a cellular automaton (CA) model. Simulations are performed for the microstructural evolution and concentration distribution in an Al-4 wt.%Cu alloy with initially equiaxed grain structures holding in a temperature gradient. A slight deviation from local equilibrium, estimated from experimental data, is considered to be the driving force for LFM. The direction of LFM is triggered by concentration fluctuations setting a concentration gradient as a further driving force. The simulation successfully reproduces the experimentally observed microstructures generated by LFM accompanied by a particle free zone behind the liquid film. The solid concentration in the particle free zone is found to be the equilibrium solid concentration. The simulated concentration profile across the migrating liquid film agrees well with experimental measurements. The simulated grain structure becomes coarser and highly elongated after holding in the temperature gradient. The results reveal that the increase in transversal grain width is mainly controlled by LFM, while the grain elongation in longitudinal direction is attributed to both LFM and temperature gradient zone melting. The solid concentration decreases from the initial (supersaturated) composition to the local equilibrium solid concentration corresponding to the local temperature. This article is part of the theme issue 'Transport phenomena in complex systems (part 2)'.
