School of Environmental Science and Engineering, Tianjin University, Tianjin, 300350, PR China.
Key Laboratory of Environmental Biotechnology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, No. 18 Shuangqing Road, Haidian District, Beijing, 100085, China.
Environ Res. 2022 Jun;209:112740. doi: 10.1016/j.envres.2022.112740. Epub 2022 Jan 24.
Effective treatment and utilization of sludge contribute to achieve conventional carbon emission reduction and resource recovery, which is of great significance to realize carbon neutralization of WWTPs. Sludge carbonization derived biochar has attracted more interest because of high potential as catalytic materials. Therein, sludge-derived electrode exhibits a promising potential in the case of sludge utilization for electrocatalysis, however, electrocatalytic performance of the already reported sludge-derived electrode is unsatisfactory due to insufficient active sites. In this study, an efficient Pd/sludge-biochar loaded foam nickel (Pd-SAC@Ni) was successfully fabricated using simple pyrolysis and solidification method, and exhibited remarkable electrocatalytic performance for 4-chlorophenol (4-CP) degradation. Furthermore, the morphology, element distribution and crystal composition were characterized by SEM, EDS, XPS and XRD. The Pd-SAC@Ni electrode exhibited superior electrocatalytic performance than Ni, SAC@Ni, Pd-Ni electrodes. The reduction rate of 98.9% was achieved at current density of 5 mA cm, 4-CP concentration of 0.8 mM and initial pH of 7.0. Also, Pd-SAC@Ni electrode showed desirable reusability and achieved 98% of 4-CP removal after multiple runs of experiments. Moreover, the active hydrogen species (H*) generation capacity of electrodes was determined using tert-butanol (TBA) as trapping agent. The mechanism analysis demonstrated that direct reduction process and indirect reduction process both involved in the 4-CP degradation process, and their contribution were 19.5% and 80.5%, respectively. Then, the intermediates formed in the electrochemical degradation of 4-CP were revealed by HPLC and the plausible degradation pathway was proposed. This study provides a cost-effective approach for preparing sludge biochar electrode, and explored a novel way to promote resourceful utilization of sludge for carbon neutrality.
有效处理和利用污泥有助于实现常规碳减排和资源回收,这对于实现污水处理厂的碳中和具有重要意义。污泥碳化衍生的生物炭作为催化材料具有很大的潜力,因此受到了更多的关注。在利用污泥进行电催化的情况下,污泥衍生电极表现出了很有前景的潜力,然而,由于活性位点不足,已报道的污泥衍生电极的电催化性能并不令人满意。在本研究中,采用简单的热解和固化法成功制备了高效的 Pd/污泥生物炭负载泡沫镍(Pd-SAC@Ni),并在 4-氯苯酚(4-CP)降解方面表现出了显著的电催化性能。此外,通过 SEM、EDS、XPS 和 XRD 对形貌、元素分布和晶体组成进行了表征。与 Ni、SAC@Ni 和 Pd-Ni 电极相比,Pd-SAC@Ni 电极具有更优越的电催化性能。在电流密度为 5 mA cm、4-CP 浓度为 0.8 mM 和初始 pH 为 7.0 的条件下,实现了 98.9%的还原率。此外,Pd-SAC@Ni 电极表现出良好的可重复使用性,经过多次实验后,仍能达到 98%的 4-CP 去除率。此外,通过叔丁醇(TBA)作为捕获剂来确定电极的活性氢物种(H*)生成能力。通过机理分析表明,4-CP 降解过程涉及直接还原和间接还原过程,其贡献分别为 19.5%和 80.5%。然后,通过 HPLC 揭示了在 4-CP 的电化学降解过程中形成的中间产物,并提出了可能的降解途径。本研究为制备污泥生物炭电极提供了一种具有成本效益的方法,并探索了促进污泥资源利用以实现碳中和的新途径。