Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Science (PSAS), Beni-Suef University, P.O. Box 62511, Beni-Suef, Egypt.
Renewable Energy Science and Engineering Department, Faculty of Postgraduate Studies for Advanced Science (PSAS), Beni-Suef University, P.O. Box 62511, Beni-Suef, Egypt.
J Contam Hydrol. 2022 May;247:103977. doi: 10.1016/j.jconhyd.2022.103977. Epub 2022 Feb 14.
In the current study, iron-based metal organic framework (MOF) MIL-101(Fe) was successfully prepared via a facile solvothermal method. The as-synthesized MIL-101(Fe) was characterized by XRD, FE-SEM, FTIR, TGA and zeta potential techniques, and then employed as an adsorbent for methyl orange (MO) and methylene blue (MB) dyes. The adsorbed quantities of MO (1067 to 831 mg/g) were higher than those of MB (402 to 353 mg/g) indicating the high selectivity of MIL-101(Fe) towards the anionic dye at all temperatures (20-60 °C). Adsorption processes of MO and MB followed the pseudo-second order kinetics and the Langmuir equilibrium model. The interaction mechanism at a molecular level was analyzed and deeply interpreted via the advanced multilayer adsorption model. Steric parameters indicated that MO molecular aggregation (n) was 0.95-1.33 thus signifying the presence of multi-docking and multi-interactions mechanisms. The aggregated number of MB was superior to unity (i.e., n = 1.17-1.78) suggesting a vertical adsorption position and a multi-interactions mechanism at all operating temperatures. The density of MIL-101(Fe) active sites (D 77.33-52.38 mg/g for MB and 149.91-107.07 for MO) and the total adsorbed dye layers (N = 3.12-2.49 for MB and 5.36-3.67 for MO) resulted in improving the adsorption capacities of MO dye. The adsorption energies ranged from 8.89 to 33.73 kJ/mol and they displayed that MO and MB uptake processes were exothermic controlled by physical interactions at all temperatures. Regeneration results indicated that this adsorbent can be reutilized without a significant loss in its removal efficiency after five adsorption-desorption cycles. Overall, the adsorption capacity, chemical stability, and regeneration performance of MIL-101(Fe) support its application as a very promising adsorbent for the removal of organic hazardous pollutants from water.
在本研究中,通过简便的溶剂热法成功制备了铁基金属有机骨架(MOF) MIL-101(Fe)。所合成的 MIL-101(Fe) 通过 XRD、FE-SEM、FTIR、TGA 和动电电势技术进行了表征,然后用作甲基橙(MO)和亚甲基蓝(MB)染料的吸附剂。MO(1067 至 831mg/g)的吸附量高于 MB(402 至 353mg/g),表明 MIL-101(Fe) 在所有温度(20-60°C)下对阴离子染料具有高选择性。MO 和 MB 的吸附过程遵循准二级动力学和 Langmuir 平衡模型。通过先进的多层吸附模型对分子水平上的相互作用机制进行了分析和深入解释。空间参数表明 MO 分子聚集(n)为 0.95-1.33,表明存在多对接和多相互作用机制。MB 的聚集数大于 1(即,n=1.17-1.78),表明在所有操作温度下存在垂直吸附位置和多相互作用机制。MIL-101(Fe) 活性位的密度(D 77.33-52.38mg/g 用于 MB 和 149.91-107.07mg/g 用于 MO)和总吸附染料层(N=3.12-2.49 用于 MB 和 5.36-3.67 用于 MO)导致 MO 染料的吸附容量提高。吸附能范围为 8.89 至 33.73kJ/mol,表明 MO 和 MB 的吸收过程是由所有温度下的物理相互作用控制的放热过程。再生结果表明,在经过五次吸附-解吸循环后,该吸附剂可以在不显著损失其去除效率的情况下重复使用。总体而言,MIL-101(Fe) 的吸附容量、化学稳定性和再生性能支持其作为从水中去除有机危险污染物的很有前途的吸附剂的应用。