Xiong Nankun, Wang Anyan, Xie Tengbao, Hu Tianbao, Chen Qiang, Zhao Qiang, Li Gang
Defense Key Disciplines Lab of Novel Micro-Nano Devices and System Technology, Key Laboratory of Optoelectronic Technology and Systems, Ministry of Education, Chongqing University, Chongqing, Sichuan 400044, China.
Institute of Fluid Measurement and Simulation, China Jiliang University, Hangzhou, Zhejiang 310018, China.
ACS Appl Mater Interfaces. 2022 May 11;14(18):20813-20822. doi: 10.1021/acsami.2c04728. Epub 2022 Apr 29.
This paper proposes a simple and robust method for spontaneously digitizing aqueous samples into a high-density microwell array. The method is based on an oil-triggered template-confined dewetting phenomenon. To realize the dewetting-induced sample digitization, an aqueous sample is first infused into a networked microwell array (NMA) through a pre-degassing-based self-pumping mechanism, and an immiscible oil phase is then applied over the surface of NMA chip to induce the templated dewetting. Due to periodic interfacial tension heterogeneity, such dewetting ruptures the sample at the thinnest parts (., connection channels) and spontaneously splits the sample into droplets in individual microwells. Without requiring any complex pumping or valving systems, this method can discretize a sample into tens of thousands of addressable droplets in a matter of minutes with nearly 98% usage. To demonstrate the utility and universality of this self-digitization method, we exploited it to discretize samples into 40 233 wells for a digital PCR assay, the digital quantification of bacteria, the self-assembly of spherical colloidal photonic crystals, and the spherical crystallization of drugs. We believe this facile technique will provide a substantial benefit to many compartmentalized assays or syntheses where it is necessary to partition samples into a large number of small individual volumes.
本文提出了一种简单且稳健的方法,可将水性样品自动数字化到高密度微孔阵列中。该方法基于油触发的模板受限去湿现象。为实现去湿诱导的样品数字化,首先通过基于预脱气的自泵机制将水性样品注入网络化微孔阵列(NMA)中,然后在NMA芯片表面施加不混溶的油相以诱导模板化去湿。由于周期性的界面张力不均匀性,这种去湿会在最薄的部分(即连接通道)使样品破裂,并自发地将样品分裂成单个微孔中的液滴。该方法无需任何复杂的泵送或阀门系统,可在几分钟内将样品离散成数万个可寻址的液滴,利用率近98%。为证明这种自数字化方法的实用性和通用性,我们利用它将样品离散到40233个孔中,用于数字PCR检测、细菌的数字定量、球形胶体光子晶体的自组装以及药物的球形结晶。我们相信这种简便的技术将为许多需要将样品分配到大量小的独立体积中的区室化检测或合成提供巨大的益处。