Ayiania Michael, Garcia Aidan, Haghighi Mood Sohrab, McEwen Jean-Sabin, Garcia-Perez Manuel
Department of Biological Systems Engineering, Washington State University, Pullman, Washington 99164, United States.
Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Pullman, Washington 99164, United States.
ACS Omega. 2022 Apr 22;7(17):14490-14504. doi: 10.1021/acsomega.1c05718. eCollection 2022 May 3.
Due to phosphate's necessity in agriculture and its danger to the environment, the development of adsorbents for its removal has been the subject of intensive research activity. Although the introduction of nitrogen functionality to chars and modification of biochar with metals have proven to change the character of the char structure, making it more active toward nutrients, there is no study regarding the doping of biochar with metals and nitrogen simultaneously for the adsorption of phosphates. This paper is the first of two in which we report the production, characterization, and evaluation of N-metal-doped biochars from cellulose for phosphate removal from liquid effluents. In this part, we describe the production and characterization of N-Ca-, N-Fe-, and N-Mg-doped biochars. The elemental composition and surface area of each of the materials produced is reported. Elemental and surface characterization of the chars are reported with the largest N content appearing at a temperature of 800 °C (12.5 wt %) and a maximum surface area for biochar produced at 900 °C (1314 m/g). All of the adsorbents were visualized by scanning electron microscope (SEM), confirming that although there are some crystals on the surface of the biochar produced, most of the N, Mg, and Ca are part of the polyaromatic ring structure. Transmission electron microscope (TEM) images clearly show the formation of nanoclusters with the metals in the case of N-Fe and N-Ca biochars. The N-Mg biochars show a uniform distribution of the Mg through the carbon surface. X-ray photoelectron spectroscopy (XPS) studies of the biochars produced with metals and varying nitrogen levels clearly show Mg and Ca peaks shifting their position in the presence of N, suggesting the formation of stable structures between metals and N in the carbon polyaromatic ring system. To elucidate the nature of these structures, we conducted DFT-based calculations on different configurations of the nitrogenated structures. The calculated binding energy shifts were found to closely match the XPS experimental binding energy, confirming the likelihood of these structures in biochar. Finally, based on our experimental and modeling results, we hypothesize that an important fraction of the Mg and Ca is introduced to these biochars at the edges. Another fraction of Mg and Ca is in the form of phthalocyanine-like internal structures. More experimental studies are needed to confirm the formation of these very interesting structures and their potential use as adsorbents or catalysts.
由于磷在农业中的必要性及其对环境的危害,开发用于去除磷的吸附剂一直是密集研究活动的主题。尽管已证明向炭中引入氮官能团以及用金属对生物炭进行改性会改变炭结构的特性,使其对养分更具活性,但尚无关于同时用金属和氮掺杂生物炭以吸附磷酸盐的研究。本文是系列两篇论文中的第一篇,我们报告了由纤维素制备的氮 - 金属掺杂生物炭用于从液体废水中去除磷酸盐的制备、表征及评估。在这一部分,我们描述了氮 - 钙、氮 - 铁和氮 - 镁掺杂生物炭的制备及表征。报告了所制备的每种材料的元素组成和表面积。炭的元素和表面表征结果显示,氮含量最高出现在800℃(12.5 wt%),生物炭的最大表面积出现在900℃(1314 m²/g)。所有吸附剂均通过扫描电子显微镜(SEM)观察,证实尽管所制备的生物炭表面有一些晶体,但大部分氮、镁和钙是多芳环结构的一部分。透射电子显微镜(TEM)图像清楚地显示了在氮 - 铁和氮 - 钙生物炭的情况下金属形成了纳米团簇。氮 - 镁生物炭显示镁在碳表面均匀分布。对含金属且氮含量不同的生物炭进行的X射线光电子能谱(XPS)研究清楚地表明,在有氮存在的情况下,镁和钙的峰位发生了移动,这表明在碳多芳环体系中金属和氮之间形成了稳定结构。为阐明这些结构的性质,我们对含氮结构的不同构型进行了基于密度泛函理论(DFT)的计算。计算得到的结合能位移与XPS实验结合能密切匹配,证实了这些结构在生物炭中存在的可能性。最后,基于我们的实验和建模结果,我们推测镁和钙的很大一部分是在边缘处引入到这些生物炭中的。另一部分镁和钙以类似酞菁的内部结构形式存在。需要更多的实验研究来证实这些非常有趣的结构的形成及其作为吸附剂或催化剂的潜在用途。