Brito Jordan, Asawa Kaustubh, Marin Alexander, Andrianov Alexander K, Choi Chang-Hwan, Sukhishvili Svetlana A
Department of Materials Science & Engineering, Texas A&M University, College Station, Texas 77843, United States.
Department of Mechanical Engineering, Stevens Institute of Technology, Hoboken, New Jersey 07030, United States.
ACS Appl Mater Interfaces. 2022 Jun 8;14(22):26225-26237. doi: 10.1021/acsami.2c04499. Epub 2022 May 25.
Often inspired by nature, techniques for precise droplet manipulation have found applications in microfluidics, microreactors, and water harvesting. However, a widely applicable strategy for surface modification combining simultaneous hydrophobicity and pH-sensitivity has not yet been achieved by employing environmentally friendly assembly conditions. The introduction of pH-responsive groups to an otherwise fluorinated polyphosphazene (PPZ) unlocks pH-selective droplet capture and transfer. Here, an all-aqueous layer-by-layer (LbL) deposition of polyelectrolytes is used to create unique hydrophobic coatings, endowing surfaces with the ability to sense environmental pH. The high hydrophobicity of these coatings (ultimately reaching a contact angle >120° on flat surfaces) is enabled by the formation of hydrophobic nanoscale domains and controllable by the degree of fluorination of PPZs, polyamine-binding partners, deposition pH, and coating thickness. Inspired by the hierarchical structure of rose petals, these versatile coatings reach a contact angle >150° when deposited on structured surfaces while introducing a tunable adhesivity that enables precise droplet manipulation. The films exhibited a strongly pronounced parahydrophobic rose petal behavior characterized through the contact angle hysteresis. Depositing as few as five bilayers (∼25 nm) on microstructured rather than smooth substrates resulted in superhydrophobicity with water contact angles >150° and the attenuation of the contact angle hysteresis, enabling highly controlled transfer of aqueous droplets. The pH-selective droplet transfer was achieved between surfaces with either the same microstructure and LbL film building blocks, which were assembled at different pH, or between surfaces with different microstructures coated with identical films. The demonstrated capability of these hydrophobic LbL films to endow surfaces with controlled hydrophobicity through adsorption from aqueous solutions and control the adhesion and transfer of water droplets between surfaces can be used in droplet-based microfluidics applications and water collection/harvesting.
精确液滴操控技术常常受到自然启发,已在微流体、微反应器和集水领域得到应用。然而,通过采用环境友好的组装条件,尚未实现一种将疏水性和pH敏感性同时结合的广泛适用的表面改性策略。在其他方面为氟化聚磷腈(PPZ)引入pH响应基团,可实现pH选择性液滴捕获和转移。在此,采用聚电解质的全水层层(LbL)沉积法来制备独特的疏水涂层,使表面具备感知环境pH的能力。这些涂层的高疏水性(在平面上最终接触角>120°)是由疏水纳米级域的形成实现的,并且可通过PPZ的氟化程度、多胺结合伙伴、沉积pH和涂层厚度来控制。受玫瑰花瓣分层结构的启发,这些多功能涂层沉积在结构化表面上时接触角>150°,同时引入了可调节的粘附性,从而实现精确的液滴操控。通过接触角滞后表征,这些薄膜呈现出强烈明显的准疏水玫瑰花瓣行为。在微结构化而非光滑的基材上沉积少至五层(约25 nm),就可实现水接触角>150°的超疏水性以及接触角滞后的衰减,从而实现对水滴的高度可控转移。pH选择性液滴转移可在具有相同微结构和LbL薄膜构建块但在不同pH下组装的表面之间实现,并可在涂覆相同薄膜的不同微结构表面之间实现。这些疏水LbL薄膜通过从水溶液中吸附赋予表面可控疏水性以及控制水滴在表面之间的粘附和转移的能力,可用于基于液滴的微流体应用和集水/采水。