Int J Prosthodont. 2022 May-Jun;35(3):278-286. doi: 10.11607/ijp.7669.
To evaluate the survival of implants and abutments and the incidence of mechanical complications of single posterior implant-supported restorations using prefabricated titanium abutments.
This retrospective clinical study analyzed 172 Astra Tech OsseoSpeed internal hexagon implants (Dentsply Sirona) placed in 85 patients with a follow-up between January 2009 and January 2019. All implants were restored with prefabricated titanium abutments and cement-retained metal-ceramic crowns. The clinical outcomes recorded were implant and abutment survival rates and mechanical complications (abutment/implant fractures, screw loosening/fracture, decementation of the superstructure, veneer chipping/fractures) and were analyzed according to age, sex, implant length/diameter, bone graft, arch, implant position, parafunctional habit or dental status, and opposite arch. Kaplan-Meier survival analysis was used to determine whether the distribution of time to event/failure differed based on implant position (premolar or molar), implant diameter, or abutment angulation.
During the observation period (mean: 108 months), implant and abutment cumulative survival rates were 97.7% and 98.3%, respectively, with no statistically significant differences between implant positions (molar/premolar), implant diameters (3.5 vs 4 mm), or abutment angles (straight vs 15 degrees). Of the 172 single posterior implant-supported restorations, 14 mechanical complications (8.2%) were recorded. In particular, 3 abutment fractures (1.7%), 2 screw loosenings (1.2%), 2 screw fractures (1.2%), 1 implant fracture (0.6%), 2 chipping/fractures of veneering materials (1.2%), and 4 decementations of the superstructure (2.3%) occurred.
The single posterior implant-supported restorations using prefabricated titanium abutments remain a clinically acceptable treatment in terms of prosthetic procedure and cost-effectiveness.
评估使用预制钛基台的单颗后牙种植体-基台修复体的种植体和基台存活率以及机械并发症的发生率。
本回顾性临床研究分析了 2009 年 1 月至 2019 年 1 月期间 85 名患者的 172 颗 AstraTech OsseoSpeed 内六角种植体(登士柏西诺德)。所有种植体均采用预制钛基台和粘结固位金属-陶瓷冠修复。记录的临床结果包括种植体和基台存活率以及机械并发症(基台/种植体折断、螺丝松动/折断、修复体松动、修复体饰面材料崩瓷/折断),并根据患者年龄、性别、种植体长/直径、植骨、牙弓、种植体位置、偏侧咀嚼习惯或牙齿状况以及对颌牙弓进行分析。Kaplan-Meier 生存分析用于确定事件/失败时间的分布是否因种植体位置(前磨牙或磨牙)、种植体直径或基台角度的不同而有所差异。
在观察期(平均 108 个月)内,种植体和基台的累积存活率分别为 97.7%和 98.3%,种植体位置(磨牙/前磨牙)、种植体直径(3.5mm 与 4mm)或基台角度(直基台与 15 度基台)之间无统计学差异。172 例单颗后牙种植体-基台修复体中,共记录了 14 例机械并发症(8.2%),其中 3 例基台折断(1.7%)、2 例螺丝松动(1.2%)、2 例螺丝折断(1.2%)、1 例种植体折断(0.6%)、2 例饰面材料崩瓷/折断(1.2%)和 4 例修复体松动(2.3%)。
使用预制钛基台的单颗后牙种植体-基台修复体在修复程序和成本效益方面仍然是一种可接受的治疗方法。