College of Science Engineering and Technology, Institute for Nanotechnology and Water Sustainability, University of South Africa, UNISA Science Campus, P.O. Box 392 UNISA 0003, Florida 1709, Johannesburg, South Africa.
Post Graduate and Research Department of Chemistry, Pachaiyappa's College (Affiliated to University of Madras), Tamil Nadu, Chennai, 600 030, India.
Environ Sci Pollut Res Int. 2022 Nov;29(55):83452-83468. doi: 10.1007/s11356-022-21510-5. Epub 2022 Jun 28.
Pyrolysis GC-ToF-MS-based analytical study was employed in the identification of microplastics (MPs) in the freshwater of a dam Rietvlei (RTV) located at Gauteng Province, South Africa. These MPs extracted in five locations of the dam were found to contain five different plastic polymeric constituents including PE, PS, PA, PVC and PET along with phthalate esters and fatty acid (amides and esters) derivatives as additives. Based on the fragmented pyrolyzate products, the contribution of plastic polymers and additives was 74% and 26% respectively. Among polymers, PA was dominant with 52% followed by PVC (16%) and others (13%) such as PE, PET and PS in MPs. Scanning electron micrographs of MPs in this aquatic body displayed the rough and fibrous typed patterns. The residual mass of 8-14% was left after the thermal degradation of MPs in RTV samples in the temperature range of 500-550 °C. The results of thermogravimetry (TGA) and energy-dispersive (EDS) analyses are mutually dependent and coherent to each other by way of demonstrating the presence of various inorganic compounds in the form of additives and/or sorbates. The lessened intensities of carbonyl stretching in PA (1625 cm) and PET (1725 cm) type of MPs attributed the occurrence of degradation and weathering in this aquatic system. The possible causes to the contamination of MPs in this freshwater are the located industries and poor waste management strategies being practised in this densely populated city. Based on the industry, waste management and population perspectives, the increased contamination of MPs is very likely in this freshwater which will drastically affect the ecosystem in the near future. Based on the characterisation results, the presence of various polymers, additives and the metals in MPs is envisaged to deteriorate the aquatic life along with successive risks for the people as a consequence of bio-magnification.
采用热解气相色谱飞行时间质谱法(Pyrolysis GC-ToF-MS)对南非豪登省里特弗利大坝(Rietvlei)淡水进行了微塑料(MPs)的分析研究。在大坝的五个位置提取的这些 MPs 被发现含有五种不同的塑料聚合物成分,包括 PE、PS、PA、PVC 和 PET,以及邻苯二甲酸酯和脂肪酸(酰胺和酯)衍生物作为添加剂。根据碎片化的热解产物,塑料聚合物和添加剂的贡献分别为 74%和 26%。在聚合物中,PA 占主导地位,占 52%,其次是 PVC(16%)和其他聚合物(13%),如 PE、PET 和 PS。该水体中 MPs 的扫描电子显微镜照片显示出粗糙和纤维状的图案。在 RTV 样品中,MPs 在 500-550°C 的温度范围内热降解后,残留质量为 8-14%。热重分析(TGA)和能量色散(EDS)分析的结果相互依赖且一致,通过证明各种无机化合物以添加剂和/或吸附剂的形式存在。PA(1625 cm)和 PET(1725 cm)型 MPs 中羰基伸缩的强度降低归因于该水系统中降解和风化的发生。造成该淡水中 MPs 污染的可能原因是位于该人口稠密城市的工业和较差的废物管理策略。基于工业、废物管理和人口的角度来看,该淡水中的 MPs 污染很可能会增加,这将在不久的将来对生态系统产生巨大影响。根据表征结果,预计 MPs 中存在各种聚合物、添加剂和金属会破坏水生生物,并对人类造成生物放大的连续风险。