Linear Elastic Fracture Mechanics Assessment of a Gas Turbine Vane.

This work assesses the crack propagation at the most critical point of a second stage of a gas turbine blade by means of linear elastic fracture mechanics (LEFM). The most critical zone where the crack may nucleate, due to a combination of thermo-mechanical loads, is detected with an uncracked finite element (FE) model pre-analysis. Then the sub-modelling technique is used to obtain more precise results in terms of stresses within the area of interest. Simulations of the state of stress at the crack apex are performed through an FE model, using the Fracture Tool within ANSYS Workbench, and the stress intensity factors (SIFs) are determined accordingly. The Fracture Tool was previously verified on a simple model, and the results were compared with its analytical solution. Finally, the evaluation of the crack growth due to fatigue stress, creep, and oxidation is performed through in-house software called . The crack behavior is estimated along with the component life. Results show an unexpected decrease in KI with increasing crack length and slowing of the crack growth rate with crack propagation. A detailed analysis of this behavior emphasizes that the redistribution of the stresses at the crack apex means that unstable propagation is not expected.