Key Laboratory of Biomechanics and Mechanobiology (Beihang University), Ministry of Education, Beijing Advanced Innovation Center for Biomedical Engineering, School of Biological Science and Medical Engineering, Beihang University, Beijing, China.
Department of Vascular Surgery, Beijing Jishuitan Hospital, Beijing, China.
J Endovasc Ther. 2024 Aug;31(4):744-755. doi: 10.1177/15266028221134895. Epub 2022 Nov 20.
To investigate the relationship between the morphological structure and hemodynamic properties of the compressed iliac vein and explore the reason for the formation of thrombosis in the compressed iliac vein.
A total of 11 patients with iliac vein compression syndrome (IVCS) were included in this study, and their iliac veins were reconstructed in 3 dimensions (3D). The morphological structures of the iliac veins (confluence angle, degree of stenosis) were analyzed based on the 3D model. Variations in the hemodynamic properties of the iliac vein were investigated at 4 typical moments in one cardiac cycle, and the relationship between the different morphological configurations and the pressure difference was investigated.
In the region of the compressed iliac vein, the blood flow velocity is accelerated and the pressure changes abruptly accompanied by the increase in pressure difference. Higher time averaged wall shear stress (TAWSS) and lower relative residence time (RRT) appeared in stenosis regions of compressed iliac vein, while TAWSS was low and RRT was large near the stenosis position. There was a strong positive correlation between the degree of stenosis and the pressure difference (r=0.894), and a positive correlation between the confluence angle of the iliac vein and the pressure difference (r=0.638).
The morphological structure of the compressed iliac vein has an obvious influence on the hemodynamic surroundings; the pressure difference becomes larger when the degree of stenosis and the confluence angle increase. The iliac vein luminal areas with low TAWSS and high RRT near the compressed location can impede blood flow and lead to accumulation of blood components, which may increase the risk of thrombosis formation and should be fully considered in the treatment of IVCS.
研究受压髂静脉的形态结构与血流动力学特性之间的关系,探讨受压髂静脉血栓形成的原因。
本研究纳入 11 例髂静脉压迫综合征(IVCS)患者,对其髂静脉进行三维(3D)重建。基于 3D 模型分析髂静脉的形态结构(汇合角、狭窄程度)。在一个心动周期的 4 个典型时刻,研究髂静脉血流动力学特性的变化,并研究不同形态结构与压力差的关系。
在受压髂静脉区域,血流速度加快,压力急剧变化,压力差增大。受压髂静脉狭窄区域的平均壁切应力(TAWSS)较高,相对滞留时间(RRT)较低,而狭窄部位附近的 TAWSS 较低,RRT 较大。狭窄程度与压力差呈强正相关(r=0.894),髂静脉汇合角与压力差呈正相关(r=0.638)。
受压髂静脉的形态结构对血流动力学环境有明显影响;狭窄程度和汇合角增大时,压力差增大。受压部位附近低 TAWSS 和高 RRT 的髂静脉管腔区域可能会阻碍血流,导致血液成分积聚,增加血栓形成的风险,在治疗 IVCS 时应充分考虑。