Valencia Pedro, Espinoza Karen, Astudillo-Castro Carolina, Salazar Fernando
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Avenida España 1680, Valparaíso 2390123, Chile.
School of Food Engineering, Pontificia Universidad Católica de Valparaíso, Waddington 716, Valparaíso 2360100, Chile.
Foods. 2022 Dec 16;11(24):4080. doi: 10.3390/foods11244080.
Systematic modeling of the enzymatic hydrolysis of milk proteins is needed to assist the study and production of partially hydrolyzed milk. The enzymatic hydrolysis of milk proteins was characterized and evaluated as a function of the temperature and protease concentration using Alcalase, Neutrase and Protamex. Modeling was based on the combination of two empirical models formed by a logarithmic and a polynomial equation to correlate the kinetic constants and the operating conditions. The logarithmic equation fitted with high accuracy to the experimental hydrolysis curves with the three proteases (R2 > 0.99). The kinetic constants were correlated with the operating conditions (R2 > 0.97) using polynomial equations. The temperature and protease concentration significantly affected the initial rate of hydrolysis, i.e., the kinetic constant a, while the kinetic constant b was not significantly affected. The values for the kinetic constant a were predicted according to the operating conditions and they were strongly correlated with the experimental data (R2 = 0.95). The model allowed for a high-quality prediction of the hydrolysis curves of milk proteins. This modeling tool can be used in future research to test the correlation between the degree of hydrolysis and the functional properties of milk hydrolysates.
需要对乳蛋白的酶促水解进行系统建模,以辅助部分水解乳的研究和生产。使用碱性蛋白酶、中性蛋白酶和Protamex,对乳蛋白的酶促水解进行了表征,并将其作为温度和蛋白酶浓度的函数进行评估。建模基于由对数方程和多项式方程组成的两个经验模型的组合,以关联动力学常数和操作条件。对数方程与三种蛋白酶的实验水解曲线拟合度很高(R2 > 0.99)。使用多项式方程将动力学常数与操作条件相关联(R2 > 0.97)。温度和蛋白酶浓度显著影响水解初始速率,即动力学常数a,而动力学常数b不受显著影响。根据操作条件预测了动力学常数a的值,并且它们与实验数据高度相关(R2 = 0.95)。该模型能够对乳蛋白的水解曲线进行高质量预测。这种建模工具可用于未来的研究,以测试水解程度与乳水解产物功能特性之间的相关性。