Environmental Engineering and Management, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302, India.
School of Environmental Science and Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302, India.
Sci Total Environ. 2023 Mar 15;864:161148. doi: 10.1016/j.scitotenv.2022.161148. Epub 2022 Dec 23.
Due to the ubiquitous nature of microplastic (MP), knowledge of its fate and migration in subsurface environments like soil becomes extremely important to understand underlying ecological risk. The fate and migration of MP in subterranean settings like sand are governed by the retention/transport properties influenced by the interaction of sand and MPs. In this study, sand column experiments under simulated rainfall conditions were conducted for 180 days to assess the vertical migration of mixed MPs consisting of polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET). Sand column experiments were subjected to 60 wet-dry cycles over 180 days. The effects of polymer type, microplastic size, sand particle size, and surface roughness on the migration of MPs were evaluated. Results showed that the smallest-sized fragmented PE particles had the highest migration potential compared to PET and PE. The ratios of the diameters of MP particles and sand particles (d/d) played a significant role in determining the penetration depth of the various sizes of MPs. The MP particles with d/d 0.11 showed greater penetration depth in sand media and were detected in the column effluent water after 60 days of a column run. In addition, surface roughness, low ionic strength water, irregularly shaped particles, and wet and dry cycles contributed to the migration of MPs in the sand column. Three new absorbance peaks corresponding to the hydroxyl, CO stretch, and carbonyl groups evolved in the extracted PE MPs sample from different depths, as shown by FTIR analysis, suggesting that PE MPs had been oxidised. XPS analysis revealed changes in the surface properties of the MPs, indicating that oxidation occurred at the top layer, causing structural deterioration of the PE MPs. However, oxidation of the surface bonds was restricted in the layers underneath due to a lack of oxygen. The finding of the study suggests that in a natural environment, such accumulation and migration of MPs in sandy soil can increase the possibilities to the underlying groundwater contamination.
由于微塑料 (MP) 的普遍存在,了解其在土壤等地下环境中的命运和迁移对于理解潜在的生态风险变得极其重要。MP 在地下环境(如沙子)中的命运和迁移受沙子和 MP 相互作用影响的保留/传输特性控制。在这项研究中,在模拟降雨条件下进行了为期 180 天的沙柱实验,以评估由聚丙烯 (PP)、聚乙烯 (PE) 和聚对苯二甲酸乙二醇酯 (PET) 组成的混合 MPs 的垂直迁移。沙柱实验在 180 天内经历了 60 个干湿循环。评估了聚合物类型、微塑料尺寸、沙粒尺寸和表面粗糙度对 MPs 迁移的影响。结果表明,与 PET 和 PE 相比,最小尺寸的碎片化 PE 颗粒具有最高的迁移潜力。MP 颗粒与沙粒直径比 (d/d) 在确定各种尺寸 MPs 的穿透深度方面起着重要作用。d/d 为 0.11 的 MP 颗粒在沙质介质中具有更大的穿透深度,并且在柱运行 60 天后在柱出水水中被检测到。此外,表面粗糙度、低离子强度水、不规则形状颗粒和干湿循环促进了 MPs 在沙柱中的迁移。从不同深度提取的 PE MPs 样品的 FTIR 分析显示出三个新的对应于羟基、CO 伸展和羰基的吸收峰的演变,表明 PE MPs 已被氧化。XPS 分析表明 MPs 表面性质发生了变化,表明氧化发生在顶层,导致 PE MPs 结构恶化。然而,由于缺乏氧气,下面的层中表面键的氧化受到限制。该研究的结果表明,在自然环境中,这种 MPs 在沙质土壤中的积累和迁移会增加对地下含水层污染的可能性。