Markale Ishaan, Velásquez-Parra Andrés, Alcolea Andrés, Jiménez-Martínez Joaquín
Department of Water Resources and Drinking Water, Eawag, 8600 Dübendorf, Switzerland.
Department of Civil, Environmental and Geomatic Engineering, ETH Zurich, 8093 Zürich, Switzerland.
Transp Porous Media. 2023;146(1-2):159-175. doi: 10.1007/s11242-022-01747-x. Epub 2022 Feb 5.
The unsaturated zone, located between the soil surface and the phreatic level, plays an important role in defining the fate of any substance entering the subsoil. In addition to the processes of flow and transport taking place in the liquid phase, surface reactions such as adsorption to the solid phase may occur and increase the residence time of the substance entering the system. In this study, we aim to understand the pore-scale mechanisms that control adsorption in unsaturated systems. We combine 2D pore-scale experimental images with numerical simulations to analyze flow, transport, and adsorption under different liquid saturation degrees. We demonstrate the role of mixing on adsorption at the liquid-solid interfaces by analyzing the deformation in time of a pulse-injected surfactant. We also analyze the impact of the isotherm functional shape and the inclusion of the liquid-gas interfaces as adsorption sites on this surface reaction. The enhancement of mixing as saturation decreases is accompanied by a reduction in the amount of adsorbed mass, located mainly along preferential flow paths, where the solute is primarily transported. For the same isotherm, a nonlinear behavior of adsorption as a function of liquid saturation has been observed. This is explained by the nonlinear variation of the volume fraction of liquid behaving as preferential path or stagnation zone as liquid saturation decreases, despite the linear decrease in the surface area of solids accessible for adsorption.
The online version contains supplementary material available at 10.1007/s11242-022-01747-x.
非饱和带位于土壤表面与潜水位之间,在确定进入下层土壤的任何物质的归宿方面起着重要作用。除了在液相中发生的流动和输运过程外,还可能发生诸如吸附到固相上的表面反应,从而增加进入系统的物质的停留时间。在本研究中,我们旨在了解控制非饱和系统中吸附的孔隙尺度机制。我们将二维孔隙尺度实验图像与数值模拟相结合,以分析不同液体饱和度下的流动、输运和吸附。通过分析脉冲注入表面活性剂随时间的变形,我们证明了混合在液固界面吸附中的作用。我们还分析了等温线函数形状以及将液-气界面作为该表面反应的吸附位点的影响。随着饱和度降低,混合增强,同时吸附质量减少,吸附质量主要沿优先流动路径分布,溶质主要在这些路径中输运。对于相同的等温线,观察到吸附量随液体饱和度呈非线性变化。这是由于随着液体饱和度降低,作为优先路径或停滞区的液体体积分数呈非线性变化,尽管可用于吸附的固体表面积呈线性减小。
在线版本包含可在10.1007/s11242-022-01747-x获取的补充材料。