Liao Zurong, Li Chaojie, Zhong Jiyou, Li Yang, Zhao Weiren
School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006, China.
School of Basic Medical Sciences, Guangzhou Medical University, Guangzhou 510182, China.
Dalton Trans. 2023 Feb 28;52(9):2853-2862. doi: 10.1039/d2dt04126j.
A broadband near-infrared (NIR) light source based on a phosphor-converted light-emitting diode (pc-LED) has attracted increasing interest to be used in non-destructive examination, security-monitoring and medical diagnosis fields, which stimulates the exploration of NIR phosphors with high performance. Herein, a series of Cr-activated garnet LnScInGaO:Cr (Ln = La, Gd, Y, and Lu) phosphors were reported, allowing an emission peak ranging from 726 to 822 nm. Among them, YScInGaO:Cr with an optimized Cr-doping concentration of 6 mol% exhibits a high internal quantum efficiency (IQE = 83.1%) and excellent absorption efficiency (AE = 44.2%) under 450 nm blue light excitation, enabling an external quantum efficiency as high as 36.7%. Moreover, this material can maintain 93.0% of the initial intensity when heated up to 423 K, implying outstanding thermal stability. Finally, a prototype NIR pc-LED device was fabricated by coating the optimized phosphor on a 455 nm LED chip, which generates a broadband NIR emission with a peak located at 765 nm and a full width at half maximum of 127 nm. The NIR output power and NIR photoelectric conversion efficiency of this device were found to be 38.01 mW and 11.0%, respectively, under 100 mA driving current, demonstrating the feasibility of this material to be applied in NIR pc-LEDs.
基于磷光体转换发光二极管(pc-LED)的宽带近红外(NIR)光源在无损检测、安全监控和医学诊断领域的应用引起了越来越多的关注,这激发了人们对高性能近红外磷光体的探索。在此,报道了一系列Cr激活的石榴石LnScInGaO:Cr(Ln = La、Gd、Y和Lu)磷光体,其发射峰范围为726至822 nm。其中,Cr掺杂浓度优化为6 mol%的YScInGaO:Cr在450 nm蓝光激发下表现出高内部量子效率(IQE = 83.1%)和优异的吸收效率(AE = 44.2%),使得外部量子效率高达36.7%。此外,该材料在加热到423 K时可保持初始强度的93.0%,这意味着其具有出色的热稳定性。最后,通过将优化后的磷光体涂覆在455 nm LED芯片上制备了一个近红外pc-LED原型器件,该器件产生宽带近红外发射,峰值位于765 nm,半高宽为127 nm。在100 mA驱动电流下,该器件的近红外输出功率和近红外光电转换效率分别为38.01 mW和11.0%,证明了这种材料应用于近红外pc-LED的可行性。