The synthesis of an acrylamide copolymer and its synergistic effects on clay flocculation of red tide organisms.

The modified clay (MC) method is a common emergency treatment technology for red tides, and the selection of surface modifiers is the key to the MC technology. A cationic polymeric modifier, the copolymer of dimethyl diallyl ammonium chloride and acrylamide (P (DMDAAC-co-AM), PDA) was optimized via a visible-light-induced polymerization technique. The PDA-modified clay (PDAMC) was prepared with strong salt tolerance and achieved efficiencies of 86% at the concentration of 50 mg L, and the dose was 90% lower than that of aluminum polychloride-modified clay (PACMC). While polyacrylamide and commercial PDA can achieve efficiencies of only 25 and 67%, respectively, but high doses were required. This is because PDA changed the surface charges of clay particles from negative to positive, which promotes the formation of the polymer-chains bridging network to overcome the difficulties of curling in seawater. According to the analysis of flocculation parameters and spatial conformation of PDAMC, the high salinity tolerance of the PDAMC was attributed to the synergistic processes of charge neutralization and the three-dimensional network bridging. Therefore, this study has developed a highly effective flocculant material used in seawater and provided an important reference for the management of red tide organisms.