Environmental Friendly Modification of the Superhydrophobic Surface for Iron-Based Amorphous Alloy Films and Their Magnetic Surface Effect.

It is challenging to convert the superhydrophobic surfaces of iron-based amorphous films into hydrophilic surfaces through surface treatment. In this study, a novel, environmentally friendly method is used to change the superhydrophobic surfaces of FeSiB amorphous alloy films, which include their rougher and smoother surfaces. The boron element in the films reacted with the flavonoids and anthocyanins in the solution to create organic conversion membranes and organic boronizing naphthoquinone derivatives on the surfaces of the films when they were dipped in tea polyphenol aqueous solution at 80 °C for 60 min. On the rougher surface and the smoother surface, the organic conversion membranes had thicknesses of about 10 and 3 μm, respectively. When iron-based amorphous alloy films were employed as soft magnetic materials to create electronic and electrical devices, the packaging issue caused by low wettability with epoxy resin had been resolved because both the side surfaces of modified films had good wettability with epoxy resin. In addition, the magnetic surface effect of modified films was significant. After surface treatment, the inductance value of the film decreased by more than 25%. The magnetic surface effect of iron-based amorphous films can be applied to the preparation of tea sensors, and the sensor can achieve the "one to one" high precision test of "one tea curve". The magnetic surface effect of the film provides a quick, simple, lower cost, and strong anti-interference idea for the rapid detection of tea polyphenols.