Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China.
Faculty of Materials Science and Energy Engineering/Institute of Technology for Carbon Neutrality, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China.
Adv Mater. 2023 Jun;35(22):e2212059. doi: 10.1002/adma.202212059. Epub 2023 Apr 14.
Lithium cobalt oxide (LCO) is widely used in Li-ion batteries due to its high volumetric energy density, which is generally charged to 4.3 V. Lifting the cut-off voltage of LCO from 4.3 V to 4.7 V will increase the specific capacity from 150 to 230 mAh g with a significant improvement of 53%. However, LCO suffers serious problems of H1-3/O1 phase transformation, unstable interface between cathode and electrolyte, and irreversible oxygen redox reaction at 4.7 V. Herein, interface stabilization and band structure modification are proposed to strengthen the crystal structure of LCO for stable cycling of LCO at an ultrahigh voltage of 4.7 V. Gradient distribution of magnesium and uniform doping of nickel in Li layers inhibit the harmful phase transitions of LCO, while uniform LiMg Ni PO coating stabilizes the LCO-electrolyte interface during cycles. Moreover, the modified band structure improves the oxygen redox reaction reversibility and electrochemical performance of the modified LCO. As a result, the modified LCO has a high capacity retention of 78% after 200 cycles at 4.7 V in the half cell and 63% after 500 cycles at 4.6 V in the full cell. This work makes the capacity of LCO one step closer to its theoretical specific capacity.
钴酸锂(LCO)由于其高体积能量密度而被广泛应用于锂离子电池,其通常充电至 4.3V。将 LCO 的截止电压从 4.3V 提高到 4.7V,比容量将从 150mAh/g 提高到 230mAh/g,显著提高 53%。然而,LCO 存在严重的 H1-3/O1 相转变、阴极与电解质之间不稳定的界面以及在 4.7V 时不可逆的氧氧化还原反应等问题。在此,提出了界面稳定和能带结构修饰,以增强 LCO 的晶体结构,从而实现 LCO 在 4.7V 的超高电压下的稳定循环。Li 层中镁的梯度分布和镍的均匀掺杂抑制了 LCO 的有害相转变,而均匀的 LiMgNiPO 涂层在循环过程中稳定了 LCO-电解质界面。此外,修饰后的能带结构提高了氧氧化还原反应的可逆性和修饰后 LCO 的电化学性能。结果,改性 LCO 在半电池中以 4.7V 循环 200 次后的容量保持率为 78%,在全电池中以 4.6V 循环 500 次后的容量保持率为 63%。这项工作使 LCO 的容量更接近其理论比容量。