Sáez Patricia, García-Cervilla Raúl, Santos Aurora, Romero Arturo, Lorenzo David
Chemical Engineering and Materials Department, Complutense University of Madrid, 28040 Madrid, Spain.
Ind Eng Chem Res. 2023 Feb 7;62(7):3282-3293. doi: 10.1021/acs.iecr.2c03722. eCollection 2023 Feb 22.
Surfactant-enhanced aquifer remediation is commonly applied in polluted sites with dense non-aqueous phase liquids (DNAPLs). This technique transfers the contamination from subsoil to an extracted emulsion, which requires further treatment. This work investigated the treatment of a complex emulsion composed of a nonionic surfactant and real DNAPL formed of chlorinated organic compounds (COCs) and generated as a lindane production waste by air stripping under alkaline conditions. The influence of the surfactant (1.5-15 g·L), COC concentrations (2.3-46.9 mmol·L), and temperature (30-60 °C) on the COC volatilization was studied and modeled in terms of an apparent constant of Henry at pH > 12. In addition, the surfactant stability was studied as a function of temperature (20-60 °C) and surfactant (2-10 g·L), COC (0-70.3 mmol·L), and NaOH (0-4 g·L) concentrations. A kinetic model was successfully proposed to explain the loss of surfactant capacity (SCL). The results showed that alkali and temperature caused the SCL by hydrolysis of the surfactant molecule. The increasing surfactant concentration decreased the COC volatility, whereas the temperature improved the COC volatilization. Finally, the volatilization of COCs in alkaline emulsions by air stripping (3 L·h) was performed to evaluate the treatment of an emulsion composed of the COCs (17.6 mmol·kg) and surfactant (3.5 and 7 g·L). The air stripping was successfully applied to remove COCs (>90%), reaching an SCL of 80% at 60 °C after 8 h. Volatilization can remove COCs from emulsions and break them, enhancing their further disposal.
表面活性剂强化含水层修复技术通常应用于含有致密非水相液体(DNAPLs)的污染场地。该技术将污染物从地下土壤转移到提取的乳液中,而该乳液需要进一步处理。本研究调查了由非离子表面活性剂和由氯代有机化合物(COCs)形成的实际DNAPL组成的复杂乳液的处理情况,该乳液是在碱性条件下通过空气吹脱作为林丹生产废料产生的。研究了表面活性剂(1.5 - 15 g·L)、COC浓度(2.3 - 46.9 mmol·L)和温度(30 - 60 °C)对COC挥发的影响,并根据pH > 12时的亨利表观常数进行了建模。此外,还研究了表面活性剂稳定性与温度(20 - 60 °C)、表面活性剂(范围为2 - 10 g·L)、COC(0 - 70.3 mmol·L)和NaOH(0 - 4 g·L)浓度的关系。成功提出了一个动力学模型来解释表面活性剂容量损失(SCL)。结果表明,碱和温度通过表面活性剂分子的水解导致了SCL。表面活性剂浓度的增加降低了COC的挥发性,而温度提高了COC的挥发性。最后,通过空气吹脱(3 L·h)对碱性乳液中COCs的挥发进行了实验,以评估由COCs(17.6 mmol·kg)和表面活性剂(3.5和7 g·L)组成的乳液的处理效果。空气吹脱成功地用于去除COCs(>90%),在60 °C下8小时后SCL达到80%。挥发可以从乳液中去除COCs并使其破乳,从而便于其进一步处置。