Langner Joanna Lind, Pham Nicole Segovia, Richey Ann, Oquendo Yousi, Mehta Shayna, Vorhies John Schoeneman
Pediatric Orthopaedic Surgery, Stanford University, Palo Alto, CA 94304, United States.
Orthopaedic Surgery, Hospital for Special Surgery, New York, NY 10021, United States.
World J Orthop. 2023 May 18;14(5):340-347. doi: 10.5312/wjo.v14.i5.340.
Transmission of severe acute respiratory syndrome coronavirus 2 can occur during aerosol generating procedures. Several steps in spinal fusion may aerosolize blood but little data exists to quantify the risk this may confer upon surgeons. Aerosolized particles containing infectious coronavirus are typically 0.5-8.0 μm.
To measure the generation of aerosols during spinal fusion using a handheld optical particle sizer (OPS).
We quantified airborne particle counts during five posterior spinal instrumentation and fusions (9/22/2020-10/15/2020) using an OPS near the surgical field. Data were analyzed by 3 particle size groups: 0.3-0.5 μm/m, 1.0-5.0 μm/m, and 10.0 μm/m. We used hierarchical logistic regression to model the odds of a spike in aerosolized particle counts based on the step in progress. A spike was defined as a > 3 standard deviation increase from average baseline levels.
Upon univariate analysis, bovie ( < 0.0001), high speed pneumatic burring ( = 0.009), and ultrasonic bone scalpel ( = 0.002) were associated with increased 0.3-0.5 μm/m particle counts relative to baseline. Bovie ( < 0.0001) and burring ( < 0.0001) were also associated with increased 1-5 μm/m and 10 μm/m particle counts. Pedicle drilling was not associated with increased particle counts in any of the size ranges measured. Our logistic regression model demonstrated that bovie (OR = 10.2, < 0.001), burring (OR = 10.9, < 0.001), and bone scalpel (OR = 5.9, < 0.001) had higher odds of a spike in 0.3-0.5 μm/m particle counts. Bovie (OR = 2.6, < 0.001), burring (OR = 5.8, < 0.001), and bone scalpel (OR = 4.3, = 0.005) had higher odds of a spike in 1-5 μm/m particle counts. Bovie (OR = 0.3, < 0.001) and drilling (OR = 0.2, = 0.011) had significantly lower odds of a spike in 10 μm/m particle counts relative to baseline.
Several steps in spinal fusion are associated with increased airborne particle counts in the aerosol size range. Further research is warranted to determine if such particles have the potential to contain infectious viruses. Previous research has shown that electrocautery smoke may be an inhalation hazard for surgeons but here we show that usage of the bone scalpel and high-speed burr also have the potential to aerosolize blood.
严重急性呼吸综合征冠状病毒2可在产生气溶胶的操作过程中传播。脊柱融合手术的几个步骤可能会使血液形成气溶胶,但几乎没有数据可用于量化这可能给外科医生带来的风险。含有传染性冠状病毒的气溶胶颗粒通常为0.5 - 8.0微米。
使用手持式光学粒子计数器(OPS)测量脊柱融合手术过程中气溶胶的产生情况。
我们在五个后路脊柱内固定融合手术(2020年9月22日至2020年10月15日)期间,使用OPS在手术区域附近对空气中的粒子计数进行了量化。数据按3个粒径组进行分析:0.3 - 0.5微米/米、1.0 - 5.0微米/米和10.0微米/米。我们使用分层逻辑回归来模拟基于进行中的步骤气溶胶化粒子计数峰值的几率。峰值定义为相对于平均基线水平增加超过3个标准差。
单因素分析显示,相对于基线,电刀(<0.0001)、高速气动磨钻(=0.009)和超声骨刀(=0.002)与0.3 - 0.5微米/米的粒子计数增加有关。电刀(<0.0001)和磨钻(<0.0001)也与1 - 5微米/米和10微米/米的粒子计数增加有关。椎弓根钻孔在任何测量的粒径范围内均与粒子计数增加无关。我们的逻辑回归模型表明,电刀(OR = 10.2,<0.001)、磨钻(OR = 10.9,<0.001)和骨刀(OR = 5.9,<0.001)在0.3 - 0.5微米/米粒子计数出现峰值的几率更高。电刀(OR = 2.6,<0.001)、磨钻(OR = 5.8,<0.001)和骨刀(OR = 4.3,=0.005)在1 - 5微米/米粒子计数出现峰值的几率更高。相对于基线,电刀(OR = 0.3,<0.001)和钻孔(OR = 0.2,=0.011)在10微米/米粒子计数出现峰值的几率显著更低。
脊柱融合手术的几个步骤与气溶胶粒径范围内空气中粒子计数增加有关。有必要进一步研究以确定这些粒子是否有可能含有传染性病毒。先前的研究表明,电灼烟雾可能对外科医生构成吸入危害,但在此我们表明,骨刀和高速磨钻的使用也有可能使血液形成气溶胶。