Applied Solid Mechanics Laboratory, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, 575025, India.
Applied Solid Mechanics Laboratory, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, 575025, India.
Med Eng Phys. 2023 Jul;117:103997. doi: 10.1016/j.medengphy.2023.103997. Epub 2023 May 19.
The inhomogeneous distribution of collagen fiber in cartilage can substantially influence the knee kinematics. This becomes vital for understanding the mechanical response of soft tissues, and cartilage deterioration including osteoarthritis (OA). Though the conventional computational models consider geometrical heterogeneity along with fiber reinforcements in the cartilage model as material heterogeneity, the influence of fiber orientation on knee kinetics and kinematics is not fully explored. This work examines how the collagen fiber orientation in the cartilage affects the healthy (intact knee) and arthritic knee response over multiple gait activities like running and walking.
A 3D finite element knee joint model is used to compute the articular cartilage response during the gait cycle. A fiber-reinforced porous hyper elastic (FRPHE) material is used to model the soft tissue. A split-line pattern is used to implement the fiber orientation in femoral and tibial cartilage. Four distinct intact cartilage models and three OA models are simulated to assess the impact of the orientation of collagen fibers in a depth wise direction. The cartilage models with fibers oriented in parallel, perpendicular, and inclined to the articular surface are investigated for multiple knee kinematics and kinetics.
The comparison of models with fiber orientation parallel to articulating surface for walking and running gait has the highest elastic stress and fluid pressure compared with inclined and perpendicular fiber-oriented models. Also, the maximum contact pressure is observed to be higher in the case of intact models during the walking cycle than for OA models. In contrast, the maximum contact pressure is higher during running in OA models than in intact models. Additionally, parallel-oriented models produce higher maximum stresses and fluid pressure for walking and running gait than proximal-distal-oriented models. Interestingly, during the walking cycle, the maximum contact pressure with intact models is approximately three times higher than on OA models. In contrast, the OA models exhibit higher contact pressure during the running cycle.
Overall, the study indicates that collagen orientation is crucial for tissue responsiveness. This investigation provides insights into the development of tailored implants.
软骨中胶原纤维的不均匀分布会极大地影响膝关节的运动学。这对于理解软组织的力学响应以及软骨退化(如骨关节炎)至关重要。尽管传统的计算模型将软骨模型中的几何异质性和纤维增强考虑为材料异质性,但纤维取向对膝关节动力学和运动学的影响尚未得到充分探索。这项工作研究了软骨中的胶原纤维取向如何影响健康(完整膝关节)和关节炎膝关节对跑步和行走等多种步态活动的反应。
使用 3D 有限元膝关节模型计算步态周期中的关节软骨响应。使用纤维增强多孔超弹性(FRPHE)材料来模拟软组织。使用分割线模式在股骨和胫骨软骨中实现纤维取向。模拟了四个不同的完整软骨模型和三个 OA 模型,以评估深度方向胶原纤维取向的影响。研究了纤维取向与关节表面平行、垂直和倾斜的软骨模型在多种膝关节运动学和动力学方面的影响。
与倾斜和垂直纤维取向模型相比,具有平行于关节表面纤维取向的模型在行走和跑步步态下具有最高的弹性应力和流体压力。此外,在行走周期中,与 OA 模型相比,完整模型的最大接触压力更高。相比之下,在 OA 模型中,最大接触压力在跑步时更高。此外,与近-远取向模型相比,平行取向模型在行走和跑步步态下产生更高的最大应力和流体压力。有趣的是,在行走周期中,完整模型的最大接触压力大约是 OA 模型的三倍。相比之下,OA 模型在跑步周期中表现出更高的接触压力。
总体而言,该研究表明胶原取向对于组织响应至关重要。这项研究为定制植入物的开发提供了思路。