Galloway Johanna M, Aslam Zabeada P, Yeandel Stephen R, Kulak Alexander, Ilett Martha A, Kim Yi-Yeoun, Bejarano-Villafuerte Angela, Pokroy Boaz, Drummond-Brydson Rik M, Freeman Colin L, Harding John H, Kapur Nikil, Meldrum Fiona C
School of Chemistry, University of Leeds Leeds LS2 9JT UK
Institute for Materials Research, School of Chemical and Process Engineering, University of Leeds Leeds LS2 9JT UK.
Chem Sci. 2023 May 30;14(24):6705-6715. doi: 10.1039/d3sc00869j. eCollection 2023 Jun 21.
The cylindrical pores of track-etched membranes offer excellent environments for studying the effects of confinement on crystallization as the pore diameter is readily varied and the anisotropic morphologies can direct crystal orientation. However, the inability to image individual crystals within the pores in this system has prevented many of the underlying mechanisms from being characterized. Here, we study the crystallization of calcium sulfate within track-etched membranes and reveal that oriented gypsum forms in 200 nm diameter pores, bassanite in 25-100 nm pores and anhydrite in 10 nm pores. The crystallization pathways are then studied by coating the membranes with an amorphous titania layer prior to mineralization to create electron transparent nanotubes that protect fragile precursor materials. By visualizing the evolutionary pathways of the crystals within the pores we show that the product single crystals derive from multiple nucleation events and that orientation is determined at early reaction times. Finally, the transformation of bassanite to gypsum within the membrane pores is studied using experiment and potential mean force calculations and is shown to proceed by localized dissolution/reprecipitation. This work provides insight into the effects of confinement on crystallization processes, which is relevant to mineral formation in many real-world environments.
径迹蚀刻膜的圆柱形孔为研究受限环境对结晶的影响提供了极佳的条件,因为孔径易于改变,且各向异性形态能够引导晶体取向。然而,在该系统中无法对孔内的单个晶体进行成像,这阻碍了许多潜在机制的表征。在此,我们研究了径迹蚀刻膜内硫酸钙的结晶过程,发现直径为200 nm的孔中形成了定向石膏,25 - 100 nm的孔中形成了硬石膏,10 nm的孔中形成了无水石膏。随后,通过在矿化之前用非晶态二氧化钛层涂覆膜来创建电子透明纳米管,以保护脆弱的前驱体材料,从而研究结晶途径。通过观察孔内晶体的演化途径,我们发现产物单晶源自多个成核事件,且取向在反应早期就已确定。最后,利用实验和势能平均力计算研究了膜孔内硬石膏向石膏的转变,结果表明其通过局部溶解/再沉淀进行。这项工作深入了解了受限环境对结晶过程的影响,这与许多实际环境中的矿物形成相关。