Marta Herlina, Rismawati Ari, Soeherman Giffary Pramafisi, Cahyana Yana, Djali Mohamad, Yuliana Tri, Sondari Dewi
Department of Food Technology, Faculty of Agro-Industrial Technology, Universitas Padjadjaran, Bandung 45363, Indonesia.
Department of Agroindustry Technology, Lampung State Polytechnic, Lampung 35141, Indonesia.
Polymers (Basel). 2023 Jul 28;15(15):3215. doi: 10.3390/polym15153215.
Starch is widely applied in various industrial sectors, including the food industry. Starch is used as a thickener, stabilizer, or emulsifier. However, arrowroot starch generally has weaknesses, such as unstable under heating and acidic conditions, which are generally applied to processing in the food industry. Modifications were applied to improve the characteristics of native arrowroot starch. In this study, arrowroot starch was modified by heat-moisture treatment (HMT), octenylsuccinylation (OSA), and dual modification between OSA and HMT in a different sequence--namely, HMT followed by OSA, and OSA followed by HMT. This study aims to determine the effect of different modification methods on the physicochemical and functional properties of native arrowroot starch. The result shows that both single HMT and dual modification caused damage to native starch granules, such as the formation of cracks and roughness. For single OSA treatment, especially, there is no significant change in granule morphology after modification. All modification treatments did not change the crystalline type of starch but reduced the RC of native starch. Both single HMT and dual modifications (HMT-OSA, OSA-HMT) increased pasting temperature and setback, but, conversely, decreased the peak and the breakdown viscosity of native starch, whereas single OSA had the opposite trend compared with the other modifications. HMT played a greater role in increasing the thermal stability and the retrogradation ability of arrowroot starch. Both single modifications (HMT and OSA) increased the hardness and gumminess of native starch, and the opposite was true for the dual modifications. HMT had a greater effect on color characteristics, where the lightness and whiteness index of native arrowroot starch decreased. Single OSA modification increased swelling volume higher than dual modification. Both single HMT and dual modifications increased water absorption capacity and decreased the oil absorption capacity of native arrowroot starch.
淀粉广泛应用于包括食品工业在内的各个工业领域。淀粉用作增稠剂、稳定剂或乳化剂。然而,木薯淀粉通常存在弱点,例如在加热和酸性条件下不稳定,这在食品工业加工中普遍存在。人们采用改性方法来改善天然木薯淀粉的特性。在本研究中,木薯淀粉通过热湿处理(HMT)、辛烯基琥珀酰化(OSA)以及OSA和HMT以不同顺序进行的双重改性——即HMT后接OSA以及OSA后接HMT。本研究旨在确定不同改性方法对天然木薯淀粉理化和功能特性的影响。结果表明,单一的HMT和双重改性都会对天然淀粉颗粒造成损伤,如形成裂缝和粗糙度。特别是对于单一的OSA处理,改性后颗粒形态没有显著变化。所有改性处理都没有改变淀粉的晶型,但降低了天然淀粉的相对结晶度(RC)。单一的HMT和双重改性(HMT - OSA、OSA - HMT)均提高了糊化温度和回生值,但相反地,降低了天然淀粉的峰值和崩解粘度,而单一的OSA与其他改性相比则呈现相反趋势。HMT在提高木薯淀粉的热稳定性和回生能力方面发挥了更大作用。单一改性(HMT和OSA)均提高了天然淀粉的硬度和胶粘性,而双重改性则相反。HMT对颜色特性影响更大,天然木薯淀粉的亮度和白度指数降低。单一的OSA改性比双重改性使膨胀体积增加得更高。单一的HMT和双重改性均提高了天然木薯淀粉的吸水能力并降低了其吸油能力。