Liang Min, Dai Suyi, Cheng Haijun, Yu Chang, Li Weiguang, Lai Fang, Yang Kang, Ma Li, Liu Xiongmin
School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, China.
BMC Chem. 2023 Sep 2;17(1):110. doi: 10.1186/s13065-023-01016-y.
In this study, the oxidation characteristics of isoprene were investigated using a custom-designed mini closed pressure vessel test (MCPVT). The results show that isoprene is unstable and polymerization occurs under a nitrogen atmosphere. Under an oxygen atmosphere, the oxidation process of isoprene was divided into three stages: (1) isoprene reacts with oxygen to produce peroxide; (2) Peroxides produce free radicals through thermal decomposition; (3) Free radicals cause complex oxidation and thermal runaway reactions. The oxidation of isoprene conforms to the second-order reaction kinetics, and the activation energy was 86.88 kJ·mol. The thermal decomposition characteristics of the total oxidation product and purified peroxide mixture were determined by differential scanning calorimetry (DSC). The initial exothermic temperatures T were 371.17 K and 365.84 K, respectively. And the decomposition heat Q were 816.66 J·g and 991.08 J·g, respectively. It indicates that high concentration of isoprene peroxide has a high risk of thermal runaway. The results of thermal runaway experiment showed that the temperature and pressure of isoprene oxidation were prone to rise rapidly, which indicates that the oxidation reaction was dangerous. The reaction products of isoprene were analyzed by gas chromatography-mass spectrometry (GC-MS). The main oxidation products were methyl vinyl ketone, methacrolein, 3-methylfuran, etc. The main thermal runaway products were dimethoxymethane, 2,3-pentanedione, naphthalene, etc. Based on the reaction products, the possible reaction pathway of isoprene was proposed.
在本研究中,使用定制设计的小型密闭压力容器试验(MCPVT)研究了异戊二烯的氧化特性。结果表明,异戊二烯不稳定,在氮气气氛下会发生聚合反应。在氧气气氛下,异戊二烯的氧化过程分为三个阶段:(1)异戊二烯与氧气反应生成过氧化物;(2)过氧化物通过热分解产生自由基;(3)自由基引发复杂的氧化和热失控反应。异戊二烯的氧化符合二级反应动力学,活化能为86.88 kJ·mol。通过差示扫描量热法(DSC)测定了总氧化产物和纯化过氧化物混合物的热分解特性。初始放热温度T分别为371.17 K和365.84 K。分解热Q分别为816.66 J·g和991.08 J·g。这表明高浓度的异戊二烯过氧化物具有较高的热失控风险。热失控实验结果表明异戊二烯氧化的温度和压力容易迅速升高,这表明氧化反应具有危险性。通过气相色谱-质谱联用(GC-MS)分析了异戊二烯的反应产物。主要氧化产物为甲基乙烯基酮、甲基丙烯醛、3-甲基呋喃等。主要热失控产物为二甲氧基甲烷、2,3-戊二酮、萘等。基于反应产物提出了异戊二烯可能的反应途径。