Supra-Quantum Dot Assemblies to Maximize Color-Based Multiplexed Fluorescence Detection with a Smartphone Camera.

Photoluminescence (PL) imaging and bioanalysis with smartphone-based devices are of growing interest for point-of-care/point-of-need diagnostics. Strategies for maximizing sensitivity have been explored in this context, but color multiplexing has been very limited, with its maximum level unexplored. Here, we evaluated color multiplexing with smartphone-based PL imaging by using supra-nanoparticle assemblies of quantum dots (supra-QDs). These materials were prepared as composite colors that were tailored to the red-green-blue (RGB) color space of smartphone cameras by coassembling different ratios of R-, G-, and B-emitting QDs on a silica nanoparticle scaffold. The supra-QDs were characterized and used to label cell-sized objects that were measured under flow with a smartphone-based device. Each color followed an approximately linear trajectory in the RGB space, and training of support vector machine models enabled color classification with overall accuracies ≥87% for 10-color multiplexing and better accuracies for fewer colors. Most misclassification occurred at low signal levels, such that establishing a nonclassifiable zone near the origin of RGB color space improved the overall 10-color classification accuracy to ≥94%. Similar improvements in accuracy with greater retention of data were possible with a probabilistic rather than a radial threshold. Simulations that were parameterized by experimental data suggested that ≥14-color multiplexing with accuracies ≥90% should be possible with an optimized supra-QD color set. This study is an important foundation for advancing RGB color-based multiplexing for imaging and analyses with smartphone cameras and related charge-coupled device and CMOS color image sensor technologies.