Department of Trauma and Orthopaedics, Cork University Hospital, Cork, Ireland.
Department of Trauma and Orthopaedics, Cork University Hospital, Cork, Ireland.
Injury. 2024 Feb;55(2):111185. doi: 10.1016/j.injury.2023.111185. Epub 2023 Nov 10.
Hip fractures have become a major public health priority due to their increasing incidence. Intramedullary (IM) nailing has gained popularity as a surgical technique for managing these fractures. However, comparative studies with extramedullary devices indicate potentially increased mechanical complications associated with IM nailing. Specifically, there have been recent reports of early implant fracture associated with the TFNA system. This study compares the rate of mechanical complications between 3 implants. Secondarily, we analysed the factors associated with implant fracture and all other mechanical complications.
This retrospective study included 803 IM nails performed between 2008-2021 for the fixation of proximal femur fractures at a level 1 trauma centre. We recorded patient demographics, AO fracture classification, implant specification and intra-operative parameters such as tip-apex distance, Cleveland index, reduction quality, presence of medial calcar integrity, neck-shaft angle. The outcomes analysed included implant fracture, lag screw cut-out, >10 mm backing out, autodynamisation, periprosthetic fracture, non-union at 6 months and time to revision surgery.
The overall implant fracture rate was 3.1 % (25/803), with no statistically significant difference between the three devices (p = 0.51). The TFNA group included 183 patients with a median follow-up of 1.6 years. The TFNA fracture rate was 2.2 % (4/183) which occurred at 207 +/- 16.66 days post-operatively. The rate of all mechanical complications was 4.9 % in the TFNA group, 12.9 % in the InterTAN group and 17 % in the IMHS group. Non-union (p < 0.001) and increasing lag screw length (p < 0.02) were identified as risk factors for implant fracture and other mechanical complications. The reverse oblique fracture pattern (AO 31 A3.1) was associated with mechanical complications only (p < 0.01). The cumulative survival rates without revision for the TFNA, InterTAN, IMHS groups were 97.8 %, 95.5 % and 87.9 % respectively at 2.5 years.
The rates of implant fracture were comparable between the three nailing systems. The TFNA provides effective fixation for proximal femur fractures using a traditional screw without cement augmentation. The TFNA was associated with an overall reduction in mechanical complications compared to the InterTAN and IMHS. Previously reported mechanical complications associated with IM Nails may relate to older device designs.
由于髋部骨折的发病率不断上升,它已成为一个主要的公共卫生重点。髓内(IM)钉固定术已成为治疗这些骨折的一种流行的手术技术。然而,与髓外器械的比较研究表明,与 IM 钉固定术相关的机械并发症可能会增加。具体来说,最近有报道称与 TFNA 系统相关的早期植入物骨折。本研究比较了 3 种植入物的机械并发症发生率。其次,我们分析了与植入物骨折和所有其他机械并发症相关的因素。
这是一项回顾性研究,纳入了 2008 年至 2021 年间在一家 1 级创伤中心接受髓内钉治疗的 803 例股骨近端骨折患者。我们记录了患者的人口统计学特征、AO 骨折分类、植入物规格和术中参数,如尖端顶点距离、克利夫兰指数、复位质量、内侧骨皮质完整性、颈干角。分析的结果包括植入物骨折、拉力螺钉切出、>10mm 退出、自动固定、假体周围骨折、6 个月时的非愈合以及翻修手术时间。
总体植入物骨折率为 3.1%(25/803),三种器械之间无统计学差异(p=0.51)。TFNA 组包括 183 例患者,中位随访时间为 1.6 年。TFNA 骨折率为 2.2%(4/183),发生在术后 207+/-16.66 天。TFNA 组的所有机械并发症发生率为 4.9%,InterTAN 组为 12.9%,IMHS 组为 17%。非愈合(p<0.001)和拉力螺钉长度增加(p<0.02)是植入物骨折和其他机械并发症的危险因素。反向斜形骨折模式(AO 31 A3.1)仅与机械并发症相关(p<0.01)。TFNA、InterTAN、IMHS 组的无翻修累积生存率分别为 97.8%、95.5%和 87.9%,随访 2.5 年。
三种内固定系统的植入物骨折率相当。TFNA 使用传统螺钉而无需水泥增强,为股骨近端骨折提供了有效的固定。与 InterTAN 和 IMHS 相比,TFNA 总体上减少了机械并发症。先前报道的与 IM 钉相关的机械并发症可能与较旧的器械设计有关。