A novel approach for purifying food waste anaerobic digestate through bio-conditioning dewatering followed by activated sludge process: A case study.

Although anaerobic digestion is the mainstream technology for treating food waste (FW), the high pollutant concentration in the resultant food waste anaerobic digestate (FWAD) often poses challenges for the subsequent biochemical treatment such as activated sludge process. In this study, taking a typical FW treatment plant as an example, we analyzed the reasons behind the difficulties in treating FWAD and tested a novel process called as bio-conditioning dewatering followed by activated sludge process (BDAS) to purify FWAD. Results showed that high concentrations of suspended solids (SS) (16439 ± 475 mg/L), chemical oxygen demand (COD) (24642 ± 1301 mg/L), and ammonium nitrogen (NH-N) (2641 ± 52 mg/L) were main factors affecting the purification efficiency of FWAD by the conventional activated sludge process. By implementing bio-conditioning dewatering for solid-liquid separation, near 100% of SS and total phosphorus (TP), 90% of COD, 38% of total nitrogen (TN), and 37% of NH-N in the digestate could be effectively removed or recovered, consequently generating the transparent filtrate with relatively low pollution load and dry sludge cake (<60% of moisture content). Furthermore, after ammonia stripping and biochemical treatment, the effluent met the relevant discharge standards regulated by China, with the concentrations of COD, TN, NH-N, and TP ranging from 151 to 405, 10-56, 0.9-31, and 0.4-0.8 mg/L, respectively. This proposed BDAS approach exhibited stable performance and low operating costs, offering a promising solution to purify FWAD in practical engineering and simultaneously realize resource recovery.