Department of Industrial and Molecular Pharmaceutics, College of Pharmacy, Purdue University, West Lafayette, Indiana 47907, United States.
Pharmaceutical Sciences and Clinical Supply, Merck & Co., Inc., Rahway, New Jersey 07065, United States.
Mol Pharm. 2024 May 6;21(5):2223-2237. doi: 10.1021/acs.molpharmaceut.3c00996. Epub 2024 Mar 29.
The fibrillation of therapeutic peptides can present significant quality concerns and poses challenges for manufacturing and storage. A fundamental understanding of the mechanisms of fibrillation is critical for the rational design of fibrillation-resistant peptide drugs and can accelerate product development by guiding the selection of solution-stable candidates and formulations. The studies reported here investigated the effects of structural modifications on the fibrillation of a 29-residue peptide (PepA) and two sequence modified variants (PepB, PepC). The C-terminus of PepA was amidated, whereas both PepB and PepC retained the carboxylate, and Ser16 in PepA and PepB was substituted with a helix-stabilizing residue, α-aminoisobutyric acid (Aib), in PepC. In thermal denaturation studies by far-UV CD spectroscopy and fibrillation kinetic studies by fluorescence and turbidity measurements, PepA and PepB showed heat-induced conformational changes and were found to form fibrils, whereas PepC did not fibrillate and showed only minor changes in the CD signal. Pulsed hydrogen-deuterium exchange mass spectrometry (HDX-MS) showed a high degree of protection from HD exchange in mature PepA fibrils and its proteolytic fragments, indicating that most of the sequence had been incorporated into the fibril structure and occurred nearly simultaneously throughout the sequence. The effects of the net peptide charge and formulation pH on fibrillation kinetics were investigated. In real-time stability studies of two formulations of PepA at pH's 7.4 and 8.0, analytical methods detected significant changes in the stability of the formulations at different time points during the study, which were not observed during accelerated studies. Additionally, PepA samples were withdrawn from real-time stability and subjected to additional stress (40 °C, continuous shaking) to induce fibrillation; an approach that successfully amplified oligomers or prefibrillar species previously undetected in a thioflavin T assay. Taken together, these studies present an approach to differentiate and characterize fibrillation risk in structurally related peptides under accelerated and real-time conditions, providing a model for rapid, iterative structural design to optimize the stability of therapeutic peptides.
治疗性肽的纤维化会引起严重的质量问题,并对制造和储存造成挑战。深入了解纤维化的机制对于合理设计抗纤维化肽药物至关重要,并且可以通过指导选择稳定的候选物和制剂来加速产品开发。本研究报告了对结构修饰对 29 个残基肽(PepA)和两个序列修饰变体(PepB、PepC)的纤维化的影响的研究。PepA 的 C 末端酰胺化,而 PepB 和 PepC 保留羧基,并且 PepA 和 PepB 中的 Ser16 被α-氨基异丁酸(Aib)取代,PepC 中保留螺旋稳定残基。远紫外 CD 光谱的热变性研究和荧光和浊度测量的纤维化动力学研究表明,PepA 和 PepB 显示出热诱导的构象变化,并发现它们形成纤维,而 PepC 则没有纤维化,并且在 CD 信号中仅发生微小变化。脉冲氘氢交换质谱(HDX-MS)表明,成熟的 PepA 纤维及其蛋白水解片段具有高度的 HD 交换保护,表明大部分序列已被纳入纤维结构中,并且几乎同时发生在整个序列中。研究了净肽电荷和制剂 pH 值对纤维化动力学的影响。在 pH 值为 7.4 和 8.0 的两种 PepA 制剂的实时稳定性研究中,分析方法在研究过程中的不同时间点检测到制剂稳定性的显著变化,而在加速研究中则没有观察到。此外,从实时稳定性中取出 PepA 样品,并施加额外的压力(40°C,连续搅拌)以诱导纤维化;这种方法成功地放大了在硫黄素 T 测定中以前未检测到的寡聚物或前纤维物种。综上所述,这些研究提出了一种在加速和实时条件下区分和表征结构相关肽的纤维化风险的方法,为快速迭代结构设计提供了模型,以优化治疗性肽的稳定性。