Fang Dufei, Amiruddin Damian M, Kao Imin, Mahajan Devinder, Chen Xuming, Hsiao Benjamin S
Chemistry Department, Stony Brook University, Stony Brook, NY 11794-3400, USA.
Mechanical Engineering Department, Stony Brook University, Stony Brook, NY 11794-2300, USA.
Membranes (Basel). 2024 May 13;14(5):110. doi: 10.3390/membranes14050110.
The production of pure water plays a pivotal role in enabling sustainable green hydrogen production through electrolysis. The current industrial approach for generating pure water relies on energy-intensive techniques such as reverse osmosis. This study unveils a straightforward method to produce pure water, employing real-world units derived from previously simulated and developed laboratory devices. This demonstrated system is cost-effective and boasts low energy consumption, utilizing membrane distillation (MD) driven by the waste heat harnessed from photovoltaic (PV) panels. In a previous study, modeling simulations were conducted to optimize the multi-layered MD system, serving as a blueprint for the construction of prototype devices with a suitable selection of materials, enabling the construction of field-testable units. The most efficient PV-MD device, featuring evaporation and condensation zones constructed from steel sheets and polytetrafluoroethylene (PTFE) membranes, is capable of yielding high-purity water with conductivity levels below 145 μS with high flux rates.
纯水的生产对于通过电解实现可持续绿色制氢起着关键作用。当前工业上生产纯水的方法依赖于诸如反渗透等能源密集型技术。本研究揭示了一种简单的纯水生产方法,采用源自先前模拟和开发的实验室设备的实际装置。该示范系统具有成本效益且能耗低,利用由光伏(PV)板收集的废热驱动的膜蒸馏(MD)。在先前的一项研究中,进行了建模模拟以优化多层MD系统,为通过适当选择材料构建原型设备提供蓝图,从而能够构建可进行现场测试的装置。最有效的PV-MD装置,其蒸发和冷凝区由钢板和聚四氟乙烯(PTFE)膜构成,能够以高通量率产出电导率低于145μS的高纯水。