Suppr超能文献

基于超声多谱勒的腹主动脉个体血流动力学建模的可行性研究。

On the feasibility of ultrasound Doppler-based personalized hemodynamic modeling of the abdominal aorta.

机构信息

Photoacoustics & Ultrasound Laboratory Eindhoven (PULS/e), Eindhoven University of Technology, Groene Loper 3, Eindhoven, 5612AE, The Netherlands.

Department of Vascular Surgery, Catharina hospital, Michelangelolaan 2, Eindhoven, 5623EJ, The Netherlands.

出版信息

Biomed Eng Online. 2024 Jul 25;23(1):71. doi: 10.1186/s12938-024-01267-3.

Abstract

BACKGROUND

Personalized modeling is a promising tool to improve abdominal aortic aneurysm (AAA) rupture risk assessment. Computed tomography (CT) and quantitative flow (Q-flow) magnetic resonance imaging (MRI) are widely regarded as the gold standard for acquiring patient-specific geometry and velocity profiles, respectively. However, their frequent utilization is hindered by various drawbacks. Ultrasound is used extensively in current clinical practice and offers a safe, rapid and cost-effective method to acquire patient-specific geometries and velocity profiles. This study aims to extract and validate patient-specific velocity profiles from Doppler ultrasound and to examine the impact of the velocity profiles on computed hemodynamics.

METHODS

Pulsed-wave Doppler (PWD) and color Doppler (CD) data were successfully obtained for six volunteers and seven patients and employed to extract the flow pulse and velocity profile over the cross-section, respectively. The US flow pulses and velocity profiles as well as generic Womersley profiles were compared to the MRI velocities and flows. Additionally, CFD simulations were performed to examine the combined impact of the velocity profile and flow pulse.

RESULTS

Large discrepancies were found between the US and MRI velocity profiles over the cross-sections, with differences for US in the same range as for the Womersley profile. Differences in flow pulses revealed that US generally performs best in terms of maximum flow, forward flow and ratios between forward and backward flow, whereas it often overestimates the backward flow. Both spatial patterns and magnitude of the computed hemodynamics were considerably affected by the prescribed velocity boundary conditions. Larger errors and smaller differences between the US and generic CFD cases were observed for patients compared to volunteers.

CONCLUSION

These results show that it is feasible to acquire the patient-specific flow pulse from PWD data, provided that the PWD acquisition could be performed proximal to the aneurysm region, and resulted in a triphasic flow pattern. However, obtaining the patient-specific velocity profile over the cross-section using CD data is not reliable. For the volunteers, utilizing the US flow profile instead of the generic flow profile generally resulted in improved performance, whereas this was the case in more than half of the cases for the patients.

摘要

背景

个性化建模是一种有前途的工具,可以提高腹主动脉瘤(AAA)破裂风险评估。计算机断层扫描(CT)和定量流量(Q-flow)磁共振成像(MRI)分别被广泛认为是获取患者特定几何形状和速度剖面的金标准。然而,它们的频繁使用受到各种缺点的阻碍。超声在当前的临床实践中广泛应用,提供了一种安全、快速且具有成本效益的方法来获取患者特定的几何形状和速度剖面。本研究旨在从多普勒超声中提取和验证患者特定的速度剖面,并研究速度剖面对计算血液动力学的影响。

方法

成功获得了六个志愿者和七个患者的脉冲波多普勒(PWD)和彩色多普勒(CD)数据,分别用于提取横截面上的流量脉冲和速度剖面。将 US 流量脉冲和速度剖面以及通用沃默斯利(Womersley)剖面与 MRI 速度和流量进行了比较。此外,还进行了 CFD 模拟,以检查速度剖面和流量脉冲的综合影响。

结果

横截面上的 US 和 MRI 速度剖面之间存在较大差异,US 与 Womersley 剖面的差异在同一范围内。流量脉冲的差异表明,US 在最大流量、前向流量以及前向和后向流量之间的比值方面表现最佳,而 US 通常会高估后向流量。计算血液动力学的空间模式和幅度都受到规定的速度边界条件的显著影响。与志愿者相比,患者的 US 和通用 CFD 案例之间的误差更大,差异更小。

结论

这些结果表明,只要 PWD 采集可以在动脉瘤区域附近进行,并产生三相流模式,就可以从 PWD 数据中获取患者特定的流量脉冲。然而,使用 CD 数据获取横截面上的患者特定速度剖面并不可靠。对于志愿者,通常使用 US 流量剖面而不是通用流量剖面会提高性能,而对于患者,这种情况在一半以上的情况下都是如此。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/56e3/11270776/6a0d45cb8488/12938_2024_1267_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验