Allylation of cellulose microfibers for hydrosilylation with various hydrosilanes and hydrosiloxanes, and their application in corn-starch-mimosa tannin (CSMT) adhesive to improve particleboard properties.

Recently, Cellulose microfibers (CMF) have garnered significant attention due to their renewability, biodegradability, and unique properties such as high aspect ratio, low density, high strength, stiffness, and distinctive optical properties. These characteristics have been highlighted in publications worldwide. However, the structure of CMF is difficult to access with solvents, limiting its dissolution in common organic solvents. The synthesis of CMF-siloxane or CMF-silane hybrid materials from cellulose generally involves several reactions steps, and therefore catalysts. The allylation of CMF is catalyzed by the phase-transfer catalyst tetrabutylammonium bromide (TBAB), which enables the combination of CMF with allyl. This is followed by a hydrosilylation reaction catalyzed by Karstedt's catalyst, based on platinum (0), to combine the hydrophilic allylated CMF with hydride-terminated hydrophobic hydrosilane or hydrosiloxane. Environmentally friendly particleboards were developed using bio-based adhesives composed of corn-starch and Mimosa tannin (CSMT) mixtures. These mixtures included 4, 6, 8, and 10 wt% of CMF, allylated CMF and silylated CMF. The mechanical and physical properties of particleboards, such as modulus of elasticity (MOE), modulus of rupture (MOR), internal bond strength (IB), surface soundness (SS), water absorption (WA) and thickness swelling (TS) were determined.