Suppr超能文献

用于可再生能源驱动高效全水分解的超亲水和水下超疏气双功能牡丹形硒化物微纳阵列自支撑电极

Superhydrophilic and Underwater Superaerophobic Dual-Function Peony-Shaped Selenide Micro-nano Array Self-Supported Electrodes for High-Efficiency Overall Water Splitting Driven by Renewable Energy.

作者信息

Mu Leihuan, Yao Yali, Liu Qinghua, Li Jiehui, Wang Yuqing, Sun Cai-Li, He Jinmei, Qu Mengnan

机构信息

College of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.

College of Energy Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.

出版信息

ACS Appl Mater Interfaces. 2024 Sep 18;16(37):49349-49361. doi: 10.1021/acsami.4c09092. Epub 2024 Sep 4.

Abstract

With the intensification of global environmental pollution and resource scarcity, hydrogen has garnered significant attention as an ideal alternative to fossil fuels due to its high energy density and nonpolluting nature. Consequently, the urgent development of electrocatalytic water-splitting electrodes for hydrogen production is imperative. In this study, a superwetting selenide catalytic electrode with a peony-flower-shaped micronano array (MoS/CoFeSe/NiSe/nickel foam (NF)) was synthesized on NF via a two-step hydrothermal method. The optimal catalytic activity of cobalt-iron selenide was achieved by adjusting the Co/Fe ratio. The intrinsic catalytic activity of the electrodes was enhanced by incorporating transition metal selenides, which then served as a precursor for the subsequent loading of MoS nanoflowers on the surface to fully expose the active sites. Furthermore, the superwetting properties of the electrode accelerated electrolyte penetration and electron/mass transfer, while also facilitating bubble detachment from the electrode surface, thereby preventing "bubble shielding effect". This resulted in superior oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance, as well as overall water splitting capabilities. In a 1.0 M KOH solution, the electrode required only 166 and 195 mV overpotential to achieve a current density of 10 mA cm for OER and HER, respectively. When functioning as a bifunctional catalytic electrode, only 1.60 V of voltage was necessary to drive the electrolyzer to reach a current density of 10 mA cm. Moreover, laboratory simulations of wind and solar energy-driven water splitting validated the feasibility of establishing a sustainable energy-to-hydrogen production chain. This work provides new insights into the preparation of low-overpotential, high-catalytic-activity superhydrophilic and underwater superaerophobic catalytic electrodes by rationally adjusting elemental ratios and exploring changes in electrode surface wettability.

摘要

随着全球环境污染的加剧和资源的稀缺,氢气因其高能量密度和无污染的特性,作为化石燃料的理想替代品而备受关注。因此,迫切需要开发用于制氢的电催化析水电极。在本研究中,通过两步水热法在泡沫镍(NF)上合成了具有牡丹花状微米纳米阵列的超润湿性硒化物催化电极(MoS/CoFeSe/NiSe/泡沫镍(NF))。通过调节Co/Fe比实现了钴铁硒化物的最佳催化活性。通过引入过渡金属硒化物提高了电极的本征催化活性,过渡金属硒化物随后作为前驱体,用于在表面上负载MoS纳米花,以充分暴露活性位点。此外,电极的超润湿性加速了电解质的渗透和电子/质量传递,同时还促进了气泡从电极表面脱离,从而防止了“气泡屏蔽效应”。这导致了优异的析氧反应(OER)和析氢反应(HER)性能以及整体水分解能力。在1.0 M KOH溶液中,该电极在OER和HER中分别仅需166和195 mV的过电位即可达到10 mA cm的电流密度。当用作双功能催化电极时,仅需1.60 V的电压就能驱动电解槽达到10 mA cm的电流密度。此外,风能和太阳能驱动水分解的实验室模拟验证了建立可持续的能源到制氢生产链的可行性。这项工作通过合理调整元素比例和探索电极表面润湿性的变化,为制备低过电位、高催化活性的超亲水和水下超疏气催化电极提供了新的见解。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验