School of Soil and Water Conservation, Beijing Forestry University, Beijing 100083, China.
CGN New Energy Holdings Co. Ltd., Beijing 100070, China.
Ying Yong Sheng Tai Xue Bao. 2024 Jul 18;35(7):1877-1886. doi: 10.13287/j.1001-9332.202407.019.
Investigating the wind speed flow field and aerodynamic characteristics of shelterbelts with different structural features is of significant importance for the rational arrangement of shelterbelts and the mitigation of wind-blown sand disasters. Considering five cross-sectional shapes of shelterbelts (rectangle, windward right-angle triangle, leeward right-angle triangle, isosceles triangle, and parabolic) and four layout forms (single shelterbelt, L-shaped network, U-shaped network, and rectangular network), we conducted computational fluid dynamics (CFD) simulations using the large eddy simulation (LES) turbulence model to understand mean wind speed flow field and turbulence structure of shelterbelts with different structural features, and investigated the effects of shelterbelt cross-sectional shapes and layout forms on windbreak indicators, such as protection distance and area. We considered tree canopies as porous media and conducted simulation with the 'Tsujimatsu' shelterbelt in Japan with a total height () of 7 m, canopy height of 5.8 m, and a canopy base width of 2 m. The results showed that the average relative errors of mean wind speed and turbulent kinetic energy at different heights obtained by numerical simulations and field measurement were small, being 5.5% and 12%, respectively, indicating that the porous medium canopy model successfully reproduced the mean wind speed and turbulent kinetic energy in the leeward area of the shelterbelt. The rectangular cross-section shelterbelt, with the largest canopy volume, significantly obstructed airflow. The mean wind speed and turbulent kinetic energy showed a notable reduction in the leeward area near the shelterbelt, especially in the upper region (≥0.5, where denoted the height), showing the largest protection range. The parabolic cross-section shelterbelt ranked second in terms of protection range, followed by shelterbelts with windward right-angle, leeward right-angle, and isosceles triangular cross-sections. In the downstream area where horizontal distance ≥10, the mean wind speed and turbulent kinetic energy of shelterbelts with different cross-sectional shapes tended to be the same. Comparing the flow field structures of single shelterbelts and L-shaped, U-shaped, and rectangular networks, it revealed that the more shelterbelts oriented perpendicular to the incoming wind speed, the more pronounced the wind speed attenuation behind the canopy, a longer distance would be required for airflow to recover to the incoming wind speed. In contrast, the wind protection effect of shelterbelts paralleled to the wind direction was extremely limited, making the U-shaped and rectangular networks more effective in wind protection than single shelterbelts and L-shaped networks. The findings would provide references for the structural configuration and optimal layout of shelterbelt systems.
研究具有不同结构特征的林带的风速流场和空气动力特性,对于林带的合理布置和减轻风沙灾害具有重要意义。考虑到林带的五种横截面形状(矩形、迎风直角三角形、背风直角三角形、等腰三角形和抛物线形)和四种布置形式(单林带、L 形网络、U 形网络和矩形网络),我们使用大涡模拟(LES)湍流模型进行了计算流体动力学(CFD)模拟,以了解具有不同结构特征的林带的平均风速流场和湍流结构,并研究了林带横截面形状和布置形式对防风指标(如保护距离和面积)的影响。我们将树冠视为多孔介质,并对日本的“津岛”林带进行了模拟,该林带总高度为 7 米,树冠高度为 5.8 米,树冠基部宽度为 2 米。结果表明,数值模拟和现场测量得到的不同高度平均风速和湍流动能的平均相对误差较小,分别为 5.5%和 12%,表明多孔介质树冠模型成功地再现了林带背风区的平均风速和湍流动能。具有最大树冠体积的矩形横截面林带极大地阻碍了气流。林带背风区的平均风速和湍流动能明显降低,尤其是在上部区域(≥0.5,其中 表示高度),表现出最大的保护范围。抛物线形横截面林带在保护范围方面排名第二,其次是迎风直角、背风直角和等腰三角形横截面的林带。在水平距离≥10 的下游区域,不同横截面形状的林带的平均风速和湍流动能趋于相同。比较单林带和 L 形、U 形和矩形网络的流场结构,发现垂直于来流风速的林带越多,树冠后面的风速衰减越明显,气流恢复到来流风速所需的距离就越长。相比之下,与风向平行的林带的防风效果极为有限,使得 U 形和矩形网络比单林带和 L 形网络更能有效防风。研究结果将为林带系统的结构配置和优化布局提供参考。