Suppr超能文献

可能是海洋塑料的汇:泰国湾造礁珊瑚中的积累模式。

Possible sink of missing ocean plastic: Accumulation patterns in reef-building corals in the Gulf of Thailand.

机构信息

Research Institute for Applied Mechanics, Kyushu University, Kasuga-Koen, Kasuga 816-8580, Japan; Center for Ocean Plastic Studies, Research Institute for Applied Mechanics, Kyushu University, CU Research Building 14th floor, Bangkok 10330, Thailand.

Research Institute for Applied Mechanics, Kyushu University, Kasuga-Koen, Kasuga 816-8580, Japan; Center for Ocean Plastic Studies, Research Institute for Applied Mechanics, Kyushu University, CU Research Building 14th floor, Bangkok 10330, Thailand.

出版信息

Sci Total Environ. 2024 Dec 1;954:176210. doi: 10.1016/j.scitotenv.2024.176210. Epub 2024 Sep 14.

Abstract

Individual coral polyps contain three distinct components-the surface mucus layer, tissue, and skeleton; each component may exhibit varying extent of microplastic (MP) accumulation and serve as a short- or long-term repository for these pollutants. However, the literature on MP accumulation in wild corals, particularly with respect to the different components, is limited. In this study, we investigated the adhesion and accumulation of MPs in four coral species, including both large (Lobophyllia sp. and Platygyra sinensis) and small (Pocillopora cf. damicornis and Porites lutea) polyp corals collected from Si Chang Island in the upper Gulf of Thailand. The results revealed that MP accumulation varied significantly among the four coral species and their components. Specifically, P. cf. damicornis exhibited the highest degree of accumulation (2.28 ± 0.34 particles g w.w.) [Tukey's honestly significant difference (HSD) test, p < 0.05], particularly in their skeleton (52.63 %) and with a notable presence of high-density MPs (Fisher's extract test, p < 0.05). The most common MP morphotype was fragment, accounting for 75.29 % of the total MPs found in the coral. Notably, the majority of MPs were black, white, or blue, accounting for 36.20 %, 15.52 %, and 11.49 % of the samples, respectively. The predominant size range of MP particles was 101-200 μm. Nylon, polyacetylene, and polyethylene terephthalate (PET) were the prevalent polymer types, accounting for 20.11 %, 14.37 %, and 9.77 % of the identified samples, respectively. In the large polyp corals, while MP shapes, colors, and sizes exhibited consistent patterns, remarkable differences were noted in the polymer types across the three components. The findings of this study improve the understanding of MP accumulation and its fate in coral reef ecosystems, underscoring the need for further investigation into MP-accumulation patterns in reef-building corals worldwide.

摘要

个体珊瑚虫包含三个不同的组成部分——表面黏液层、组织和骨骼;每个组成部分可能表现出不同程度的微塑料(MP)积累,并作为这些污染物的短期或长期储存库。然而,关于野生珊瑚中 MP 积累的文献,特别是关于不同组成部分的文献,是有限的。在这项研究中,我们调查了来自泰国湾上游四昌岛的四种珊瑚物种(包括大型(石珊瑚属和扁脑珊瑚)和小型(拟雀鲷属珊瑚和轴孔珊瑚)珊瑚虫)中 MPs 的粘附和积累。结果表明,四种珊瑚及其组成部分的 MPs 积累差异显著。具体来说,拟雀鲷属珊瑚表现出最高的积累程度(2.28±0.34 个颗粒 g w.w.)[Tukey 的诚实显着差异(HSD)检验,p<0.05],特别是在其骨骼(52.63%)中,并且存在高密度 MPs 的明显存在(Fisher 的提取检验,p<0.05)。最常见的 MPs 形态是碎片,占珊瑚中总 MPs 的 75.29%。值得注意的是,大多数 MPs 是黑色、白色或蓝色的,分别占样本的 36.20%、15.52%和 11.49%。MP 颗粒的主要尺寸范围为 101-200μm。尼龙、聚乙炔和聚对苯二甲酸乙二醇酯(PET)是主要的聚合物类型,分别占鉴定样本的 20.11%、14.37%和 9.77%。在大型珊瑚虫中,虽然 MPs 的形状、颜色和大小表现出一致的模式,但三个组成部分之间的聚合物类型存在显著差异。本研究的结果提高了对珊瑚礁生态系统中 MPs 积累及其命运的认识,强调了需要进一步研究全球造礁珊瑚中 MPs 积累模式。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验