Abduo Jaafar, Lau Douglas
Int J Oral Maxillofac Implants. 2024 Oct 4;0(0):1-19. doi: 10.11607/jomi.11157.
Evaluation of seating accuracy of interim crowns for the immediate restoration of immediate implants (I-Imp) and delayed implants (D-Imp) placed via static computer-assisted implant surgery (sCAIS).
A maxillary training model was modified by removing the central incisors and simulating fresh extraction socket in one site and healed ridge on the other site. An I-Imp was planned in the extraction socket and D-Imp was planned in the healed site. The planned implants were used to design sCAIS surgical template and interim crowns for immediate restoration of the implants. Fourteen surgical models received sCAIS implants after which the interim crowns were inserted. Subsequently, the models with the seated crowns were scanned by a laboratory scanner. The planning virtual model was superimposed against every surgical model to measure vertical, horizontal and proximal contact errors of each crown.
All the crowns were positioned more incisally than the planned crowns. This was significantly more noticeable for the D-Imp crowns (0.81 mm) than the I-Imp crowns (0.55 mm). The 2 crown groups had similar horizontal errors (I-Imp =0.35 mm, D-Imp = 0.36 mm). The D-Imp crowns had minimal proximal contact error (0.14 mm), but the I-Imp crowns had significantly greater proximal contact error (0.74 mm) in the form of open distal contacts. This pattern of error appears related to the relationship between the socket morphology and the planned implant position.
Prefabricated interim I-Imp crowns suffered from greater errors that affected the proximal contact quality than DImp crowns. The observed deviation of the I-Imp crowns can be attributed to the socket morphology and its relation to the planned implant position. The deviations of the I-Imp crowns are clinically significant and will require clinical adjustments. Thus, caution is needed before routine use of prefabricated interim crowns on I-Imp.
评估通过静态计算机辅助种植手术(sCAIS)植入的即刻种植体(I-Imp)和延期种植体(D-Imp)即刻修复时临时冠的就位精度。
对上颌训练模型进行修改,拔除中央切牙,在一侧模拟新鲜拔牙窝,另一侧模拟愈合嵴。在拔牙窝处计划植入一枚I-Imp,在愈合部位计划植入一枚D-Imp。使用计划植入的种植体设计sCAIS手术导板和用于种植体即刻修复的临时冠。14个手术模型接受了sCAIS种植,随后插入临时冠。接着,使用实验室扫描仪对戴有就位冠的模型进行扫描。将规划虚拟模型与每个手术模型进行叠加,以测量每个冠的垂直、水平和邻面接触误差。
所有的冠都比计划的冠更靠近切端定位。这在D-Imp冠(0.81mm)中比在I-Imp冠(0.55mm)中更为明显。两组冠的水平误差相似(I-Imp为0.35mm,D-Imp为0.36mm)。D-Imp冠的邻面接触误差最小(0.14mm),但I-Imp冠以远中接触开放的形式存在明显更大的邻面接触误差(0.74mm)。这种误差模式似乎与拔牙窝形态和计划种植体位置之间的关系有关。
预制的I-Imp临时冠比D-Imp冠存在更大的误差,影响邻面接触质量。观察到的I-Imp冠的偏差可归因于拔牙窝形态及其与计划种植体位置的关系。I-Imp冠的偏差具有临床意义,需要进行临床调整。因此,在I-Imp上常规使用预制临时冠之前需要谨慎。