College of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
College of Chemistry and Chemical Engineering, Hubei Polytechnic University, Huangshi 435003, China; College of Chemistry and Environmental Engineering, Wuhan Polytechnic University, Wuhan 430023, China.
J Environ Sci (China). 2025 May;151:113-124. doi: 10.1016/j.jes.2024.04.004. Epub 2024 Apr 13.
An efficient catalytic system was developed to remove various organic pollutants by simultaneously using low-level cobalt ions, calcium carbonate micro-particles and peroxymonosulfate (PMS). A simple base-induced precipitation was used to successfully loaded Co-centered reactive sites onto the surface of CaCO microparticles. Under optimal conditions at 25 °C, 10 mg/L methylene blue (MB) could be completely degraded within 10 min with 480 µg/L Co, 0.4 g/L CaCO microparticles (or 0.4 g/L Co@CaCO) and 0.1 g/L PMS. The MB degradation followed the pseudo first order kinetics with a rate constant of 0.583 min, being 8.3, 11.5 and 53.0 times that by using Co-OH (0.07 min), Co (0.044 min) and CaCO (0.011 min) as the catalyst, respectively. It was confirmed that there was a synergistic effect in the catalytic activity between Co species and the CaCO particles but the major contributor was the highly dispersed Co species. When Co-containing simulated electroplating wastewater was used as the Co source, not only the added MB was also completely degraded within 5 min in this catalytic system, but also the coexisting heavy metal ions were substantially removed. The presently developed method was applied to simultaneously treat organic wastewater and heavy metals wastewater. The present method was also successfully used to efficiently degrade other organic pollutants including bisphenol A, sulfamethoxazole, rhodamine B, tetrabromobisphenol A, ofloxacin and benzoic acid. A catalytic mechanism was proposed for the PMS activation by Co@CaCO. The surface of CaCO particles favors the adsorption of Co. More importantly, the surface of CaCO particles provides plentiful surface -OH and -CO, and these surface groups complex with Co to produce more catalytically active species such as surface [CoOH], resulting in rapid Co/Co cycling and electron transfer. These interactions cause the observed synergistic effect between Co species and CaCO particles in PMS activation. Due to good cycle stability, strong anti-interference ability and wide universality, the new method will have broad application prospects.
开发了一种高效的催化体系,通过同时使用低浓度的钴离子、碳酸钙微颗粒和过一硫酸盐(PMS)来去除各种有机污染物。采用简单的碱诱导沉淀成功地将钴中心反应位点负载到碳酸钙微颗粒表面。在 25°C 的最佳条件下,10mg/L 的亚甲基蓝(MB)在 480μg/L 的 Co、0.4g/L 的碳酸钙微颗粒(或 0.4g/L 的 Co@CaCO)和 0.1g/L 的 PMS 存在下,可在 10min 内完全降解。MB 的降解遵循拟一级动力学,速率常数为 0.583min,分别是使用 Co-OH(0.07min)、Co(0.044min)和 CaCO(0.011min)作为催化剂时的 8.3、11.5 和 53.0 倍。证实了 Co 物种和 CaCO 颗粒之间在催化活性上存在协同效应,但主要贡献者是高度分散的 Co 物种。当使用含 Co 的模拟电镀废水作为 Co 源时,不仅添加的 MB 在该催化体系中也可在 5min 内完全降解,而且共存的重金属离子也得到了有效去除。所开发的方法被应用于同时处理有机废水和重金属废水。该方法还成功地用于有效降解其他有机污染物,包括双酚 A、磺胺甲恶唑、罗丹明 B、四溴双酚 A、氧氟沙星和苯甲酸。提出了一种 Co@CaCO 活化 PMS 的催化机制。碳酸钙颗粒的表面有利于 Co 的吸附。更重要的是,碳酸钙颗粒的表面提供了丰富的表面-OH 和-CO,这些表面基团与 Co 络合,产生更多的催化活性物种,如表面[CoOH],从而实现快速的 Co/Co 循环和电子转移。这些相互作用导致了 Co 物种和 CaCO 颗粒在 PMS 活化中的协同效应。由于具有良好的循环稳定性、较强的抗干扰能力和广泛的普遍性,该新方法将具有广阔的应用前景。