Investigation of Liquid Oils Obtained by Thermo-Catalytic Degradation of Plastic Wastes in Energy Recovery.

The most efficient technique for resolving the issue of plastic waste disposal is by converting the wastes into high-quality liquid oils through thermal and catalytic pyrolysis. The objective of this work was to study the composition of liquid oils obtained by thermal and catalytic degradation of plastic wastes containing polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET). The clay catalysts were characterized by N adsorption-desorption isotherms (BET), Scanning Electron Microscopy (SEM) and Fourier transform Infrared Spectrometry (FTIR), Polarized Optical Microscopy (POM), Atomic Force Microscopy (AFM). The effect of temperature and clay catalyst type on the yields of the end-products resulting in thermo-catalytic degradation of PS has been evaluated. Degradation of PS showed the highest liquid oil production at 86.85% in comparison to other plastic types. The characterization of the liquid oils was performed by comprehensive two-dimensional gas chromatography coupled with single quadrupole mass spectrometry (GC × GC-qMS). In liquid oils of PS, eighteen principal compounds (of groups: linear hydrocarbons, mono-aromatics, and di-aromatics) were identified. In the liquid oils of the plastic waste mixture, twenty-four principal compounds (of groups: linear hydrocarbons, mono-aromatics, oxygen-containing aromatic, di-aromatics, and tri-aromatics) were identified. The liquid oils were investigated in order to reconvert them as styrene monomers or other chemicals in energy recovery.