Hansen E K
Scand J Dent Res. 1984 Apr;92(2):141-7. doi: 10.1111/j.1600-0722.1984.tb00870.x.
The effect of Scotchbond on the wall-to-wall polymerization contraction of a visible light activated microfilled resin was investigated in cavities prepared in extracted human teeth. The cavities were cleaned either with water spray or a saturated acidic solution of EDTA, the latter giving significantly better results. The cavities were prepared with cavosurface angles between 90 degrees and 160 degrees. A highly significant improvement of marginal adaptation was found with increasing cavosurface angle.
在拔除的人牙制备的窝洞中,研究了Scotchbond对可见光固化微填料树脂壁间聚合收缩的影响。窝洞分别用水喷雾或EDTA饱和酸性溶液清洁,后者效果明显更好。制备的窝洞洞壁角在90度至160度之间。发现随着洞壁角增大,边缘适应性有极显著改善。