Lottenberg R, Hall J A, Blinder M, Binder E P, Jackson C M
Biochim Biophys Acta. 1983 Feb 15;742(3):539-57. doi: 10.1016/0167-4838(83)90272-8.
Kinetic parameters for the action of bovine alpha-thrombin on 24 commercially available peptide p-nitroanilides have been determined. The selectivity constant, kcat/Km, ranges from 3.3 X 10(1) to 1.1 X 10(8) M-1 X S-1 for the poorest and the best substrates, respectively. The best substrates for thrombin were identified as those with arginine in the P1 position, proline or a proline homolog in the P2 position, and an apolar amino acid in the P3 position. Quantitative distinction between lysine and arginine in the P1 position and other amino acids in the P2-P4 positions of the substrate is reported from the changes in the kinetic parameters for substrates differing in only a single amino acid in these positions. Effects of NaCl, CaCl2 and poly(ethylene glycol) concentrations, pH and temperature on the action of thrombin on selected substrates have been assessed. A source of large systematic error in thrombin concentration estimates was identified as resulting from adsorption losses. These losses were eliminated by inclusion of poly(ethylene glycol) in dilution and reaction buffers.
已测定牛α-凝血酶作用于24种市售肽对硝基苯胺的动力学参数。对于最差和最佳底物,选择性常数kcat/Km分别为3.3×10¹至1.1×10⁸ M⁻¹×s⁻¹。凝血酶的最佳底物被确定为在P1位置含有精氨酸、在P2位置含有脯氨酸或脯氨酸同系物且在P3位置含有非极性氨基酸的底物。根据仅在这些位置的单个氨基酸不同的底物的动力学参数变化,报道了底物P1位置的赖氨酸和精氨酸与P2 - P4位置的其他氨基酸之间的定量差异。评估了NaCl、CaCl₂和聚乙二醇浓度、pH和温度对凝血酶作用于选定底物的影响。已确定凝血酶浓度估计中一个大的系统误差源是由吸附损失导致的。通过在稀释和反应缓冲液中加入聚乙二醇消除了这些损失。