Bachtsi A R, Kiparissides C
Department of Chemical Engineering and Chemical Process Engineering, Aristotle University of Thessaloniki, Greece.
J Microencapsul. 1995 Jan-Feb;12(1):23-35. doi: 10.3109/02652049509051124.
Crosslinked poly(vinyl alcohol) particles were prepared by the addition of glutaraldehyde into a PVA methanol/water solution in the presence of 0.2 N sulphuric acid. The polymer solution was dispersed in mineral oil in a jacketed vessel, with the aid of a six-blade impeller. Spherical crosslinked particles in the size range 30-80 microns were obtained by varying the degree of agitation or/and the amount of suspending agent. The crosslinked particles, after washing and drying, were placed into a protease enzyme solution for loading. The enzyme-containing water-swollen particles were subsequently removed from the solution and the enzyme release kinetics determined by a UV spectrophotometer. The influence of the degree of crosslinking, ionic strength, pH, particle size, and degree of hydrophilicity of the polymer on the enzyme activity was retained during the adsorption-desorption studies. The release behaviour of enzymes from crosslinked PVA particles exhibited a biphasic kinetic model, with an initial fast release followed by a much slower release rate.
通过在0.2N硫酸存在下将戊二醛添加到聚乙烯醇(PVA)甲醇/水溶液中来制备交联聚乙烯醇颗粒。借助六叶叶轮,将聚合物溶液分散在夹套容器中的矿物油中。通过改变搅拌程度或/和悬浮剂的量,可获得尺寸范围为30 - 80微米的球形交联颗粒。交联颗粒经洗涤和干燥后,放入蛋白酶溶液中进行负载。随后从溶液中取出含酶的水膨胀颗粒,并通过紫外分光光度计测定酶释放动力学。在吸附 - 解吸研究过程中,聚合物的交联度、离子强度、pH值、粒径和亲水性程度对酶活性的影响得以保留。酶从交联PVA颗粒中的释放行为呈现双相动力学模型,初始快速释放后是慢得多的释放速率。